• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Need Cub Original Photos

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Brad Kamm

Well-known member
Joined
Sep 21, 2020
Messages
117
Location
Abrams, WI
I have been doing a resto on my Original, disassembled, sandblasted, primed, and painting. As I’m reassembling, I’m wondering about correct wiring routing. Since I don’t know if mine was factory when I started, not sure how all the wiring should be done. Could someone post pictures of their machine showing wiring on each side and under the hood? Pictures show progress so far. Unusually warm fall weather has helped with blasting and painting outside and bringing inside to dry. This is my first attempt at repainting. Just using CIH rattle cans on this one.
 

Attachments

  • 7B4F56C5-A760-4D45-B9B2-AE01DE8E66BE.jpeg
    7B4F56C5-A760-4D45-B9B2-AE01DE8E66BE.jpeg
    3 MB · Views: 1
  • CB44F6F0-F53F-4D55-8D5E-E7547792E7E3.jpeg
    CB44F6F0-F53F-4D55-8D5E-E7547792E7E3.jpeg
    1.5 MB · Views: 0
  • A248A9CF-4B74-494E-90E9-04F85CCB14CB.jpeg
    A248A9CF-4B74-494E-90E9-04F85CCB14CB.jpeg
    2.9 MB · Views: 0
  • 35B42DBA-A354-4F43-A946-8E3807E2146A.jpeg
    35B42DBA-A354-4F43-A946-8E3807E2146A.jpeg
    3.1 MB · Views: 0
  • 8A6DE23D-7809-46CC-A48B-FE8A8AB503A8.jpeg
    8A6DE23D-7809-46CC-A48B-FE8A8AB503A8.jpeg
    2.5 MB · Views: 0
Thanks, my shop doubles as mancave, wood shop, auto shop, and Cub shop. And 1 deer skinned out so far this year! Post those “O” pictures if you got some!
 
There are some photos of Dan Hoefler's Original that I posted in the thread linked below. Most of the photos are of his Custom Cub Cadets but his Original is stock. The Original photos are near the bottom of the linked page.

Dan Hoeflers Custom Cub Cadets.

My Original is stored at the family farm or I would go get some photos for you. I will be at the farm tomorrow evening so I could get some photos for you if the photos of Dan's don't show the details you are looking for.
 
Those are good photos, thanks! Couple questions, what color should the dash decal be? Black, white , or silver? I’ve seen all 3 for sale. How is the + wire routed to the coil? Mine was just looped around back of engine from generator to the coil. Has anyone seen the grill casting shimmed to make it lean forward? Mine was upon disassembly, without the shims in stands straight up which pushes the hood back and it hits the steering wheel. I have to shim with a flat washer or it doesn’t work correctly, Any other photos are greatly appreciated.
 
Just as you suspected, it was bent slightly, tweaked it down a little and it fits nice. I’m down to choke cable, driveshaft, and a couple decals and the tractor should be done. Hope to get the deck torn down, blasted and primed this weekend. Would be nice to find an original seat someday.
2A4E0BF9-F0E1-44A9-9FAA-B2DFDD54ACD5.jpeg
 
Looks great Brad!
 
The dash decal should be silver, and textured. Here's a reproduction one that I have on my Original:

Original Dash.jpg
 
Where did you get yours from?
I bought it from forum member Kent Shultz back in the early 2000's sometime before 2008. I believe he had a few of them custom made when he was restoring his Original and I was lucky enough to get one of his spares.
 
Back
Top