• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Leak through top of transmission assembly

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Poczik15

Member
Joined
Jan 30, 2020
Messages
16
Location
Southwest Michigan
I have a IH cub cadet 1282
Model: 142680399
Serial: 205 0587 U 706991

I'm getting a leak through the top of my drive motor, There are 2 fittings the one leaking is the "passenger" side. I believe they are to my forward an reverse controls. I've pulled it an tried blowing it out. An it still leak instantly as soon as I get her started throught the top vent of that fitting. I've looked a diagram up on parts tree an it only breaks down to the Transmission Assy, Hydrostatic Drive as a whole.

Even if I had to replace it. Idk where to start as far as finding the correct one. Help please,An thanks. Much appreciated


20200305_173050.jpg

Screenshot_20200305-173145_Gallery.jpg

Screenshot_20200305-175457_Gallery.jpg
 

Attachments

  • Screenshot_20200305-174605_Chrome.jpg
    Screenshot_20200305-174605_Chrome.jpg
    39.3 KB · Views: 206
  • 20200303_201307.jpg
    20200303_201307.jpg
    30.1 KB · Views: 227
I have a IH cub cadet 1282
Model: 142680399
Serial: 205 0587 U 706991

I'm getting a leak through the top of my drive motor, There are 2 fittings the one leaking is the "passenger" side. I believe they are to my forward an reverse controls. I've pulled it an tried blowing it out. An it still leak instantly as soon as I get her started throught the top vent of that fitting. I've looked a diagram up on parts tree an it only breaks down to the Transmission Assy, Hydrostatic Drive as a whole.

Even if I had to replace it. Idk where to start as far as finding the correct one. Help please,An thanks. Much appreciated


View attachment 137075
View attachment 137076
View attachment 137078
You can one of 2 ways, Buy new or rebuilt from Mark Cafone at Machtech direct or send yours to him to rebuild. He's the man when it comes to relief valves. http://www.machtechdirect.com/
 
You can ship them to us for rebuild.
We've rebuilt thousands of valves over the last ten years or so.
Machtech Direct
605 Furnace Rd
Conneaut Ohio 44030

check or money order for $32.50 each plus $3.50 to return ship them.
Mark C.
 
Back
Top