ajaytay
Member
Need help IDing this post hole digger. I've got all the parts, and my son replaced the seals in it and I'm trying to locate the manufacturer of this unit. It came with an 8" and 12" drills.
The "nimrod" I traded with, attached a 12" drill with a larger diameter opening, and instead of using washers to fill the space, just ran the two bolts to attach it. We'll, the bolts took just enough bend in each side, to make removal near impossible. Gears and everything else looks great in the unit.
Luckily my son was able to use his plasma cutter to sneak that tip in to cut the bolts, and with some careful grinding, was able to make the shaft presentable.
the yoke and gear box are all the same Kubota type orange. The seal seems a metric size, but so are nuts on my Chevy Traverse!
Any help on IDing this would be appreciated.
Thanks!!!
The "nimrod" I traded with, attached a 12" drill with a larger diameter opening, and instead of using washers to fill the space, just ran the two bolts to attach it. We'll, the bolts took just enough bend in each side, to make removal near impossible. Gears and everything else looks great in the unit.
Luckily my son was able to use his plasma cutter to sneak that tip in to cut the bolts, and with some careful grinding, was able to make the shaft presentable.
the yoke and gear box are all the same Kubota type orange. The seal seems a metric size, but so are nuts on my Chevy Traverse!
Any help on IDing this would be appreciated.
Thanks!!!
Attachments
-
0039079E-AF9F-4D8D-B16B-68C42B7BE4DE.jpeg94.3 KB · Views: 80
-
849C5C88-2249-42C5-8D01-84F813E17CDF.jpeg39.9 KB · Views: 79
-
43702B5D-EB51-409F-9357-52FBDA5B5A06.jpeg100.9 KB · Views: 63
-
5A990321-36DA-42BE-A3DE-7DB3AA02504D.jpeg82.1 KB · Views: 67
-
B74B3B25-3D1E-4BDC-8580-54F54D738FD7.jpeg64 KB · Views: 70
-
A24CEAE9-74AA-4C03-96EB-69652E3986EB.jpeg106 KB · Views: 62
-
9CD2B289-9024-448B-967E-00823668EE76.jpeg105.3 KB · Views: 68
-
IMG_0970.mov2.2 MB