• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Help - reassembly/linkage & wiring.

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Skip Kmitch

Well-known member
Joined
May 16, 2020
Messages
85
Location
St. Cloud, MN
I would sure appreciate some help getting my refurbished 1650 back in order. Finding I’m better at taking things apart than getting them back together. Took some photos and did some labeling but not enough.
Any pictures, or manual reference or personal experience are very welcome.
The wiring and shift linkage at the tower area are giving me nightmares. I’ll attach a couple photos.
Thanks for any help!
Skip
 

Attachments

  • 9199179E-508E-4F70-93D0-713D121A06CF.jpeg
    9199179E-508E-4F70-93D0-713D121A06CF.jpeg
    86.4 KB · Views: 356
  • 52EE3C13-BE87-455B-86B3-F1A10FFF4E56.jpeg
    52EE3C13-BE87-455B-86B3-F1A10FFF4E56.jpeg
    58.2 KB · Views: 358
  • 6A6FED49-7C6F-41E5-84F3-B94BBFED7731.jpeg
    6A6FED49-7C6F-41E5-84F3-B94BBFED7731.jpeg
    83.6 KB · Views: 346
  • 0A67FE28-9A8B-4D92-9893-B2BD597D8B03.jpeg
    0A67FE28-9A8B-4D92-9893-B2BD597D8B03.jpeg
    55.3 KB · Views: 357
For starters, pull that solenoid off and clean all the contacts and where it grounds to the tower.
Download a copy of the wire diagram should help you a lot too.
 
Skip - Roland Bedel's wiring diagram made it pretty easy for me to get my 1650 put back together this spring. Hope it helps you, too.

Roland Bedel Colored Wiring Diagram.JPG
 
Skip - I almost hate to say this but you could always go out and buy a 2nd unit. Good to have for spare parts, or if it's a good unit you can avoid switching attachments. Otherwise, you can reference the Operator Manual (which IH didn't always air-brush details quite correct), Parts look-up diagrams and the Service Manual (which is probably the best reference).
 
Skip - I almost hate to say this but you could always go out and buy a 2nd unit. Good to have for spare parts, or if it's a good unit you can avoid switching attachments. Otherwise, you can reference the Operator Manual (which IH didn't always air-brush details quite correct), Parts look-up diagrams and the Service Manual (which is probably the best reference).
That sounds like a great idea, however, besides being a little short on room, my better half might object. 😀
 
I would sure appreciate some help getting my refurbished 1650 back in order. Finding I’m better at taking things apart than getting them back together. Took some photos and did some labeling but not enough.
Any pictures, or manual reference or personal experience are very welcome.
The wiring and shift linkage at the tower area are giving me nightmares. I’ll attach a couple photos.
Thanks for any help!
Skip
Really nice rehablooks great
 
Back
Top