• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Had to make noise

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
There are charts on the web and most fastener suppliers that show what drill and taps are needed. Both metric and standard. Heli-coils can be used in some instances.
 
Next size up would be a 5/16" screw

The originals were 1/4 x 20 TPI and req'd a 7/32" drill
The 5/16 x 18 tap takes a letter drill size J
and if you go 5/16 x 24 you need a 9.32" drill
 
specalty fasteners
 

Attachments

  • 280605929_10161603558285828_5554830103007914279_n.png
    280605929_10161603558285828_5554830103007914279_n.png
    727.3 KB · Views: 0
Back
Top