Where could I look to see what numbered Delco-Remy s/g goes to my 127 or 147?
-
This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.
Sign up here: https://www.ihcubcadet.com/account/upgrades
Gen/starters
- Thread starter RAllison
- Start date
Help Support IH Cub Cadet Tractor Forum:
Maybe I asked the wrong question,I was looking to maybe replace the s/g I had and saw it had a model number. I went a different rout though. What happened is the nut holding the pulley on had come off without me knowing. The shaft and keyway were destroyed as well as the bore thru the pulley. I took it to work and welded up both the shaft and the pulley and remachined them. The s/g still sounds like it has a drag on it but it did start the tractor and is charging. Anyone have any suggestions as to why it would sound like that? The brushes and bearing are new.
Something else I noticed was 1 of the field coils was different from the other,could that cause it to turn slowly?
lpalma
Well-known member
Both coils are different, that is what makes it turn and make dc voltage.
From the parts book I have on what generator and pulley goes on what model.
Original
101951 w/ oil cup w/a 385446
101967
101997 w/o comp release w/a 385446 pulley
101996 w / comp release w/a 393620 pulley
70 101967 w/a 385446 pulley
101997 w/o comp. release 385446 pulley
100 101996 w/ comp release 393620 pulley
71, 72, 102, 104, 101996 w/a 393620 pulley
105, 124, 125, 122, 123, 101996 w/a 385446 pulley
73 101691 w/a 393620 pulley
106, 107, 126, 127 101691 w/a 393620 pulley
147 101691 w/a 393620 pulley
From the parts book I have on what generator and pulley goes on what model.
Original
101951 w/ oil cup w/a 385446
101967
101997 w/o comp release w/a 385446 pulley
101996 w / comp release w/a 393620 pulley
70 101967 w/a 385446 pulley
101997 w/o comp. release 385446 pulley
100 101996 w/ comp release 393620 pulley
71, 72, 102, 104, 101996 w/a 393620 pulley
105, 124, 125, 122, 123, 101996 w/a 385446 pulley
73 101691 w/a 393620 pulley
106, 107, 126, 127 101691 w/a 393620 pulley
147 101691 w/a 393620 pulley
Last edited:
Well my model# matches up,for the 147 anyway. Thankyou for this info sir!
I believe the S/G on the 127 matches the model# for an original...does anyone foresee a problem with that being on a127?
I know with my 321 that I can bring the motor past the compression stroke by hand,I don't know if I could do that if it didn't have the compression release
mfrade
Well-known member
No 70 had a comp. release, but some of the 100's did , look at the chart again, after the listings for the 70 , it lists the 100 next.
