• FIRST AND LAST NAMES ARE REQUIRED WHEN REGISTERING

frame swap WF to NF

Help Support IH Cub Cadet Forum:

Ken Black

Well-known member
Joined
Jan 20, 2021
Messages
265
Location
VT
yep someone at it again...
i seen tons of cut frame setups.
iam wondering as i dont see no diff between the pump and rear end between the 2.
swap NF 127 the whole frame. to a 149 transaxle with pump and hydrolic for lift.
i think if i remember to fit the 321/14h in 127. i notch the frame for the blower housing.
i cant think of anything else that is that big of diff between them..

why you ask .. will i have a 127 and i have a 149. but nothing to fit the front end. like blower or plow.
my blower and plow fit the NF. i can use the rear or a mower on it. as i have the mule for the WF.

iam not even 100% sure i want to even go thru the work. i might just leave 149 as is and make a trailer mover. tiller. 50 inch deck for it.

thoughts ideas do dont do. all input is good...
 

Ken Black

Well-known member
Joined
Jan 20, 2021
Messages
265
Location
VT
Just remove the pump from the 149 and put it on the 127, then find a way to mount the hydraulics.
i know it dont mater much on these. i think... lol
i didnt want to break the cylinder lines. but probley doesnt mater much on these compared to the big boy toys.
 

Latest posts

Top