Deck Rebuild

[mikemartin]

I have a 1985 Cub Cadet 1711 Hydro (photo below). The deck needs to be rebuilt. I cannot fix anything but my tractor guy can fix most everything. He says we need the complete hub assemblies for the three hubs on this 44" deck: pulleys, hubs, bearings and seals. Is there a source for these items? Are their bearing rebuild kits in the event that the assemblies are not available? Thanks for any advice.
Mike Martin; Madison, Ms

 

[lpalma]

Our sponsors above can help you out.

 

[mfrade]

Click on this link and scroll down Cub Cadet Parts International Harvester IH Cub Cadet CubCadet MTD CCC Parts best service and best parts!

 

[digger]

I have a 1985 Cub Cadet 1711 Hydro (photo below). The deck needs to be rebuilt. I cannot fix anything but my tractor guy can fix most everything. He says we need the complete hub assemblies for the three hubs on this 44" deck: pulleys, hubs, bearings and seals. Is there a source for these items? Are their bearing rebuild kits in the event that the assemblies are not available? Thanks for any advice.
Mike Martin; Madison, Ms

Spindle assemblies as well as rebuild kits are still available.

Cub Cadet Parts International Harvester IH Cub Cadet CubCadet MTD CCC Parts

Cub Cadet IH-126393-C1 Mower blades Deck Parts wheel spindle pulley ST745 Belts ST-745

cub cadets, mower deck, parts, spindle, belts, IH-126393-C1 pulley, for sale, deck wheel, blades, carbide, IH-144391-C91 759-3000 USE 959-3000

www.ccspecialties.org

 

[mikemartin]

To confirm, is part # 126393-C1 the correct hub/spindle/bearing assembly that is needed for this deck (44" from a 1985 CC 1711.)? Those are expensive, about $300 each. The bearing rebuild kits are about $47 each. Should I consider that route? Thanks for the help. Mike

 

[digger]

To confirm, is part # 126393-C1 the correct hub/spindle/bearing assembly that is needed for this deck (44" from a 1985 CC 1711.)? Those are expensive, about $300 each. The bearing rebuild kits are about $47 each. Should I consider that route? Thanks for the help. Mike

IH-126393-C1 is the speedup center pulley.

 

[mikemartin]

Can you advise what are the correct numbers for the 3 assemblies? For a stock unit that was cutting fine (but those assemblies are worn out and making a lot of racket) is the 'speeup' needed? Sorry to ask but I know little.

 

[digger]

Can you advise what are the correct numbers for the 3 assemblies? For a stock unit that was cutting fine (but those assemblies are worn out and making a lot of racket) is the 'speeup' needed? Sorry to ask but I know little.

Check your email

 

[digger]

Can you advise what are the correct numbers for the 3 assemblies? For a stock unit that was cutting fine (but those assemblies are worn out and making a lot of racket) is the 'speeup' needed? Sorry to ask but I know little.

You can also find all that info by hittin the parts lookup from Cub.

Lookup Parts Via Diagram | Cub Cadet US

Use our parts diagram tool to find the parts you need for your machine. Select the model and year, then browse the parts diagrams to find the right part. Add to cart when you're ready to purchase and we'll ship it to you as soon as possible!

www.cubcadet.com

 

[bjames]

If your pulleys are still good you can get the spindle assembly W/O pulley. All 3 use the same one.

 

[mgonitzke]

None of your pictures show which spindles you have. If they all are the aluminum housing version, the bearings are super cheap anywhere that sells bearings, as they are an extremely common bearing. Seals are available OEM from CC or aftermarket.