• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Cub Cadet 2000 Series Mower deck cutting issues?

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dan Levine

Member
Joined
Oct 12, 2021
Messages
10
Location
Indiana
Hello, I have a Cub Cadet 2000 Series, Model 2155. 15 HP Kohler/46 inch deck. I'm having height adjustment cutting issues. Seems as if, the lower I set the cutting height the faster the blades turn. I would think, the deck blades should spin at the same speed no mater what cutting height is set. I normally mow/cut on setting 4 (4 inches). If I set the mower deck height setting to 3 (3 inches). Seems, I have more blade power. I purchased a brand new PTO belt and installed it. No difference. Still does the same thing. There is no Belt tensioner pully for the PTO belt that I see. There is no PTO belt "adjustment" to tighten Nor loosen the PTO belt other then the deck rod release arm. The only belt tensioner pully is located on the deck it self. Can the Belt on the deck be causing these blade speed/cutting issues? Any advise or solution to these issues?

Before I go, I like to give Thanks to the people from my last post I created (I need help with a Cub Cadet 2000 series 2155?) I see no delete/remove Post button to remove that post. I apologize, for creating 2 different Posts. I'm a newbie. Admin is welcome to delete that post I created on Wed's 12:23 PM. Thanks.
 
Back
Top