Jake, sand down any rust in the discharge chute and give it a coat of graphite paint, like Slip Plate.Yes going to strip the 124 completely down. And the 105 back blade and 1450 has the blower. The blower don’t work that well but it’s been pretty wet heavy snow and the exhaust blows right on to the chute hence melting the snow and plugging it up.
Cannot comment on Slip Plate. For this job I sand and use Axalta 5717s to take the rust down to grey/black metal - rust is now gone. Then. at least two coats of high quality gloss paint with epoxy hardener OR two coats of POR15.Jake, sand down any rust in the discharge chute and give it a coat of graphite paint, like Slip Plate.
We have just the opposite issue. We are normally white from late October until mid March. This year we had a few small snows and an 18" snow, that's long gone as we have actually been above freezing a few times, just in time for rain. Weird yearWe have about 2 feet of settled snow now. Pretty odd for here this early in the season
Enter your email address to join: