• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Archive through October 18, 2016

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

memorgan

Well-known member
Joined
Apr 13, 2008
Messages
381
displayname
Mick morgan
Yes...like a 5x7...cool..
worthy.gif
 

Attachments

  • worthy.gif
    worthy.gif
    1.1 KB · Views: 153
  • worthy.gif
    worthy.gif
    1.1 KB · Views: 141
Great idea Kevin!
Ha Ha.... remember these?
310226.jpg
 

Attachments

  • 310226.jpg
    310226.jpg
    58.9 KB · Views: 170
  • 310226.jpg
    310226.jpg
    58.9 KB · Views: 162
Kevin--those are cool. Expect an order from the Stertz Family this week.
greenthumb.gif
 

Attachments

  • greenthumb.gif
    greenthumb.gif
    8.3 KB · Views: 147
  • greenthumb.gif
    greenthumb.gif
    8.3 KB · Views: 139
Okay... here goes. Dave Kamp is bringing up one half of an old wooden railroad car of Cub Cadet parts i.e. decks, tires/rims. mules drives,transmissions both hydro and gear,hoods, again... I don't know what is included in everything. The ONLY stipulation that Dave is putting on stuff is that you truly have to have a need for the item(s) for personal usage and not just turn around and sell them for a profit. NOW... since I've needed to regroup and can't find a storage shed anywhere nearby we're putting everything on the covered backroom, a shed that I just got and maybe in my neighbor's shed (haven't asked him yet). So that will save me that cost and we can now offer the parts at a LOT more reasonable.
happy.gif
UP to FREE... What I'm going to do is place the same ad here as I posted across the street... it was requested that I start posting prices so like Dave said... help find these parts good loving homes. I'm not looking to profit from this, just do as Dave wishes. I've asked for the picture I received to be resized and will post it as soon as I get it back. Here's the ad...



Would $25.00 for a nice wife frame deck be too much? I haven't seen them yet in person however from the picture they look in nice condition. That would be the whole deck with mule drive included.

42" wide frame snow thrower... same price... ALL these prices are OBO to help close the storage shed rental fees ASAP...

I have to leave for work shortly so I'll try and sum things up. Say that you need a good deck or snowthrower... make an offer... be ready to come and pick it up, promise to be able to use it and not just resell it. I'll help you load and if I reach the storage fees for the month, I'll send Dave K. a check for the profits. Sound fair enough?

I have a lot going on right now so my email address is in my profile. I will get back to you ASAP.Have an awesome day.

Marlin

Hope this is okay with everyone....
happy.gif
 

Attachments

  • happy.gif
    happy.gif
    879 bytes · Views: 149
  • happy.gif
    happy.gif
    879 bytes · Views: 148
  • happy.gif
    happy.gif
    879 bytes · Views: 134
  • happy.gif
    happy.gif
    879 bytes · Views: 142
OK, per Mick's suggestion earlier, I also have vinyl decals of the fall plow day design available for $3.00 each. Your choice of white, black, red or yellow. Size is approximately 6" wide and 5" high. Same deal as the shirts - I can deliver on Saturday at plow day. Will need your order by Monday, 10/24 to have them for that Saturday.
 
Here's Marlin's photo:

310237.jpg
 

Attachments

  • 310237.jpg
    310237.jpg
    132.9 KB · Views: 144
  • 310237.jpg
    310237.jpg
    132.9 KB · Views: 150
I have five CC mower decks I'd like to find a home for. Two are the 38" decks with cast ends, two are 50" for somewhat later Cubs, and one is a timed deck for the Originals. All are at least a little bit rusty. I've stored these long enough. $25 each or all five for $100. Trying to make some space before the snow flies.

Steve H.
 
Original from my August 13th Post is Sold. Everything else is still available. Also have the following.

128. Has all new clutch but does not seem to want to adjust properly. Comes with 44A deck that needs work and a 42inch push blade. $600

310260.jpg




Two 42 inch cast decks. Both need work. $50 each.

Miscellaneous Model 100 parts that I may throw in with any other purchase. All prices are OBO. Really would like to see this stuff gone before the snow flies. e-mail address is in my profile.
 

Attachments

  • 310260.jpg
    310260.jpg
    91.6 KB · Views: 177
  • 310260.jpg
    310260.jpg
    91.6 KB · Views: 153
Wide frame cab door skins & glass for sale. These are off a Sims cab (hard shell) that I modified. The doors are in original shape, no modifications to them other than I robbed the hinges, glass rubbers, and handles with support brackets. You get the door skins, glass, and outside door seals. Very light surface rust on bottom lip of both doors from sitting outside before I bought it. Been stored inside for past 5 years??? One bottom corner has 1" section of curled edge damaged-nothing a hammer and grinder could fix. Will send you picks if Interested. $50.00 and you pay the shipping., or pick up here. Could meet the US guys near border on Canadian side (Prescott, ON if that is easier too)
Doors located in South Mountain, ON. K0E 1W0

Contact via e-mail in profile
 
Check my items for sale listing from October 10th. I am open to some offers.
 
pair of 127 headlight bezel $10

310365.jpg
 

Attachments

  • 310365.jpg
    310365.jpg
    95.6 KB · Views: 177
  • 310365.jpg
    310365.jpg
    95.6 KB · Views: 155
headlight frame from 71? has crack can be tig welded

310369.jpg


310370.jpg
 

Attachments

  • 310370.jpg
    310370.jpg
    58.9 KB · Views: 128
  • 310369.jpg
    310369.jpg
    76.8 KB · Views: 158
  • 310369.jpg
    310369.jpg
    76.8 KB · Views: 161
  • 310370.jpg
    310370.jpg
    58.9 KB · Views: 146
Still time to order your Fall Plow Day Shirt or decal.

310372.jpg


310373.jpg


Offering this design in white, yellow, or red print on black or medium gray t-shirts and sweatshirts.

Short sleeve Tee - $10.00
Long sleeve Tee - $14.00

2XL and larger add $2.00

Crewneck Sweatshirt - $16.00

2XL and larger add $5.00

Shirts and sweatshirts will be Gildan brand 50/50 cotton/polyester moisture wicking.

Decals available in red, black, yellow, or white. They are about 6" wide by 5" high. The decals are $3.00 each.

At this late date, I will not be able to ship them to you before plow day, but I plan to be there and can deliver on-site. Payment in advance via PayPal preferred. Orders MUST be received by Monday, October 24th to assure delivery on Saturday.
 

Attachments

  • 310373.jpg
    310373.jpg
    40.9 KB · Views: 143
  • 310372.jpg
    310372.jpg
    63.8 KB · Views: 170
  • 310373.jpg
    310373.jpg
    40.9 KB · Views: 160
  • 310372.jpg
    310372.jpg
    63.8 KB · Views: 164
$250 OBO.
I was told it came off a 100 but the braces appear to fit a 1X2/1X3 Series.
I can get more pics if interested.
No delivery or shipping.
Located in Heyworth Il.
I can bring it to Blunier,s Plowday.
Text 309-531-3304

310380.jpg
 

Attachments

  • 310380.jpg
    310380.jpg
    29.4 KB · Views: 153
  • 310380.jpg
    310380.jpg
    29.4 KB · Views: 151
Hey all, if you want a plow day shirt delivered to you on Saturday, I'll need your order by the end of the day tomorrow, Monday, to give me enough time to order supplies. If you will be picking up from me in person, forget about the pre-pay and just pay me in cash on Saturday. Thanks!
 
Brinly (after market) stabilizer kit for early one hole plow with "Y" hitch.
$40 plus shipping.
310461.jpg

310462.jpg
 

Attachments

  • 310461.jpg
    310461.jpg
    69.7 KB · Views: 160
  • 310462.jpg
    310462.jpg
    83.7 KB · Views: 147
  • 310462.jpg
    310462.jpg
    83.7 KB · Views: 146
  • 310461.jpg
    310461.jpg
    69.7 KB · Views: 161
Brinly to Cat 0 sleeve hitch adaptor. Will have some of these at Bluniers on Friday. Pull all your Brinlt implements w/your Cat 0 drawbar or A Frame.

PD special $35 each

310473.jpg

310474.jpg
 

Attachments

  • 310474.jpg
    310474.jpg
    30.9 KB · Views: 131
  • 310473.jpg
    310473.jpg
    30.6 KB · Views: 143
  • 310474.jpg
    310474.jpg
    30.9 KB · Views: 147
  • 310473.jpg
    310473.jpg
    30.6 KB · Views: 143
Price Reduced!
Curtis cab parts as pictured on 9/29/15.
roof, rear supports, windshield frame w/glass & wiper. Set up for fabric doors and panels(missing) as the snaps are in place Would make a great fall project in prep for winter.
Will bring to Bluniers on Friday.

$50

Also will have along, a nice fender pan from a 682 as well as the front axle w/1" spindles

Dave Schwandt
Thanks for the Ad!!
 

Latest posts

Back
Top