• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Archive through July 18, 2012

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

twarman

Member
Joined
Nov 6, 2011
Messages
16
displayname
Tim Warman
IH Cadet 60 rear engine rider. I would consider this is nice shape considering. I am pretty sure it was the only one in the cub yellow. It is all original and does not appear to have ever been painted or modified. All the decals are there and the deck is very solid and feels smooth. It is the electric start with the 6hp Tecumseh. I have not started it but it supposedly ran last year. I aplogize for the JD seat, but it looks like it still has the original seat bracket attached to the new seat. I did notice a small bracket broken on a deck hanger, but it looks like a simple fix. The front corners of the fiberglass tub do have some small cracks, but other than that, it looks very straight. I just do not have time right now to restore of keep it. I do have plenty of pics if needed. I am in Central KY. I was asking $325. Call 502-395-1230 or email timwar1 at gmail dot com
 
For sale complete 2072 with a bad motor,lots of good parts, deck is solid, 900.00 or a good offer, or trade for cub cadet, picked up here shows 983 hrs. motor does not have a hole in it 740-687-1067
241717.jpg

241718.jpg
 
I have an Original Cub Cadet complete with mower deck and IH plow. It has fenders with reflectors and is in good shape. Last run 4 years ago. Has been stored in a dry shed. I have reproduction decals and NOS Firestone rear tires for it. Great candidate for restoration. $1200.00 call Tad 240-388-6105 Mt. Airy, Maryland
 
Well anyway, I guess that's how we welcome new forum members.
Welcome to the Forum Thaddeus.
You might want to introduce yourself out side of the classifieds if you intend to hang around these parts.

Otherwise you'll be in the "one and done" category.
 
Spankin' new Motor mount kit w/instructions for Quiet lines. $25.00 at my CC dealer $20.00 each or $75.00 for all four + shipping.
241803.jpg
 
NOS 107-127-147 dash tin. Protective plastic sheet still on, but starting to come off. Imperfection in metal at upper RH corner. $60 each or $100 for both plus shipping. Would trade both for an NOS narrow frame hydraulic lift pulley as well.
241828.jpg
 
Thanks. That just goes to show how little I pay attention to the obvious.
 
I have a bunch of stuff that came off of my 128.

Creeper assembly $175
Tiller right angle gearbox wih the mount $125
Rear lift $125
Wide frame lift assist $125
Tiller Guard for belt $15

All prices do not include shipping. Make me an offer on any or all of it. Everything worked fine until the engine blew.

Also have a QA42A that I no longer need. I have everything for the chute control and lift rod. The u-joint is bad so that might need replaced. $200. I can get photos on request. Pick up in northern Michigan only. I am about 20 minutes west of Gaylord.
241894.jpg

241895.jpg

241896.jpg

241897.jpg

241898.jpg

241899.jpg
 
The Model 70 listed on July 5th has been sold and dilevered. I finally checked the serial number... 126,518. And the Ag tires went with it.
happy.gif
 
2072 parts
dash-30.00
60"haban deck-300.00
steering wheel-30.00
pto clutch-125.00
complete power steering set up+ hydro lift all hoses brackets and front outlets-325.00
grille-20.00 1 bar broke
tailights-25.00
splined coupler-60.00
hood ornament-20.00
ih-grille logo-20.00
headlights-20.00
driveshaft-30.00
plus shipping except deck pick up only
e-mail for pics [email protected]
 
The QA42A I have listed has a bad u-joint on the chute rod. U-joints on the shaft for the thrower are fine.

Just wanted to clarify that.
 
The IH wheel weights and Ohio Steel cultivator are SOLD- Thanks John!!

Price drop on the Brinly TT-100 tool bar
$150
241935.jpg

241936.jpg

Picked up in Piqua, OH

e-mail me at: c1450c @ yahoo. com

Thanks!
Bill
 
Hoods for 71-123, 73-147 and 800-1650 $20. each. Email for pix.
Still have the Ico-Mounts fr Quiet Lines for sale post earlier.
 
I,m cleaning out my garage, preparing to move and have a few thing to sell. I would like to sell all of the item in one lot. The price is $10 .00 for all plus shipping ( your choice of shipping method). email me at [email protected] Items are located in West Harrison In.
241990.jpg
 
Tiller, complete with new wiring harness, frame mount bracket & 3 position toggle switch currently on a 2185 Cub. Used it last 2 yrs to turn up the garden & parked it this spring. Does come with all that is needed to setup on your 2000 series. $300, pickup only, Wellman, IA 52356.
242019.jpg

242020.jpg

Cub Cadet 2185 garden tractor minus the engine & the tiller as in picture. I do have some side panels, hood & a grill for this machine, just not in the pic. Tires are in very good shape, seat is great, 48" deck (not in pic) does come with that new muffler that is on engine & the battery. $200, pick up only.
242021.jpg
 
Back
Top