• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Archive through August 24, 2011

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

thoffman

Well-known member
Joined
Aug 10, 2006
Messages
3,609
displayname
Tom Hoffman
Kohler K301(14hp) minus carb and starter generator runs. $50. Pick up.
42" snow plow, subframe, and lift rod for N/F $100. Pick up.
Nice and solid 42" stamped steel deck from 125 $100. Pick up
Upper front nose piece for QL $20. +sh.
Hood for Q/L $20. +sh.
Hood for 71-123 (crossmember intact) $40. +sh.
Craftsman plastic wheel weights $50. Pick up
Wheels, rims, tire chains, pan fender set etc. email me.
229372.jpg
 
I have a 128 here that's incomplete. Missing hood, fenders, seat and misc stuff. It's a roller with all steering and a motor that's incomplete. Needs a new rod and no carb or anything. Block is in nice shape and shouldn't need any work. $100 picked up or I'll sell parts from it.
 
I've been getting requests for more pictures.
I took alot of pictures today and will e-mail high res. pics upon request. Still $1200 firm.(plow and wheel wieghts not included)
229547.jpg

229548.jpg

229549.jpg

229550.jpg
 
1-set of N.O.S.102 decals 65.00, and 1 set of n.o.s. 100 decals 70.00 in orignal boxes plus shipping
229554.jpg

229555.jpg
 
i have 4 ih hub caps not perfect but not bad the centers were repainted, and there are very few dings or rust, 350.00 plus shipping
229563.jpg
 
2- 100'2 both ran onto the trailer, could fix both or make 1 good one lots of good parts! 625.00 for the pair picked up here in ohio
740-687-1067
229597.jpg

229598.jpg
 
Prices are best guesses....plus shipping.(actual charges) from 33525

Gas Tanks.....30.00 ea
Hydro lever...20.00 splien good


229635.jpg


229636.jpg


229637.jpg
 
Cub Cadet 582. Runs good, will need a battery. Has a 44" deck, I have not used but can turn by hand so it should be in working condition. ASKING $600. Pics are too big to post, can send by request.
 
Hydrostatic transmission,pump fan, axle housings and axle from a 1996 HDS 2185 that I bought for parts.

The previous owner said it worked fine when the engine gave up the ghost, but I have not tested it.

Local pickup in Lovettsville, VA

$250.00

229770.jpg


229771.jpg
 
I have a Haban 402D Sicle Bar that i'm looking sell. It's not complete from what i can tell. It looks like it's missing the drive shaft. I'm asking $275 or trade for a snowblower to fit my IHCC 782. Pic's are available.
 
1812 no motor 400.00 or obo 1211 motor locked up 300.00 obo call 765-230-6717
230048.jpg

230049.jpg

230050.jpg
 
$20.00 sale: anything listed here for twenty bucks + shipping

147 front casting
147 fenders
147 rear end (minus hydro pump)
rear tires
steering column (good condition
42" mower deck
 
JUST IN TIME FOR FALL LEAF CLEANUP! Cub Cadet 1415 w/ a Kohler 14hp Magnum opossing twin cylinder engine, 38" deck w/ bagger attachment. Runs good. Transaxle has been serviced w/ new shift keys, new drive belt. Comes with 2 additional front tires on wheels. $ 500.00 Email me at [email protected] with any questions.
230219.jpg

230220.jpg
 
Good running 1650 with a good 50" deck. The tractor has a new oil pan, new ISO mounts, new front crank seal, new hydro filter and fluid, all installed by my local dealer, prior to me buying it. The engine is good, no smoke or noises that don't belong (normal quietline rattles don't count), PTO clutch works, and the hyd lift works. No leaks of anykind that I am aware of. Lights don't work (need to be rewired). The deck is good, no rust thru, spindles are quiet, baffle's still intact, and looks to have new blades. The hydro trunion has been repaired. Tractor runs and drives very well and is smooth at higher "working RPM's". Goes to the first one to come up with the money. Pick it up here in Louisville, KY or free delivery to Cub Arama in Fredericktown, MO, Sep 22-24, if paid for in advance. $550.00 cash or postal money order. ccproto409 at bellsouth dot net.
230242.jpg

230243.jpg

230244.jpg

230245.jpg

230246.jpg
 
The price of the 1650 I listed below is supposed to be<font size="+1"><font color="ff0000">$450.00</font></font>, not $550. <font size="-2">Guess my fingers couldn't see what they were typing, and I did a poor job of previewing</font>
 
The 1650 I listed below has been <font color="ff0000"><font size="+1">SOLD</font></font>
 
Back
Top