• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Archive through April 12, 2008

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
782 sleeve hitch lift bar 30.00. I also have some bolts to mount the upper cast iron sleeve hitch to 82 series 40 for a pair. they are new thanks lee
 
Cub Cadet 123. Has hydraulic lift and three point hitch. Nice running tractor. Smokes a little then clears. Getting better the more we run it. New tires on front and I will throw in the old narrow ones. Hydraulic pump has new hoses. I would like $450 picked up here in Ashton Il.
82831.jpg




82832.jpg

82833.jpg
 
The curved beam 8" Brinly plow I had for sale is sold.....I still have both the 8" straight beam plows for sale......Kurt
 
I've got a few more Cub Cadets to sale.

124 with 42in mower deck, $300.
82855.jpg


109 with 38in mower deck, $200.
82856.jpg


127 with 42in mower deck, 3pt, and spring assist. $400 or $300 without 3pt and sa.
82857.jpg


Tiller not included and not for sale.

I've also got 2 71s and a 100 with 38in mower decks-$200 each, 102 $125, 108 $200, and a 125 $200. Also have a set of round fenders off a 71, $200.

All items must be picked up at Odon, IN. Trades considered. Email for more information and pictures.
 
Hey guys I found another Super so I need to thin the herd....
Do you need a deck?
82867.jpg

How about a mule drive to make into a front weight bracket for the next Plow Day??
82868.jpg

Maybe a blade for a special project?
82869.jpg

82870.jpg

82871.jpg

Call me with your needs...Or these treasures will hit the scrap yard.....
 
I've got a nice #2 cart that I oiled the bed on to ward off rust before it hit the shed last fall..Stake pockets are in place..
All it needs is a new home $175.00 O.B.O.
82873.jpg

82874.jpg

82875.jpg

82876.jpg
 
Complete True Category 0 - 3 point on your Cub Cadet Quietline tractor.

Similiar to the original IH Kit #190-389 / 388

Uses the hydraulic lift cylinder that raises the deck. Easy Install. Only 2 holes to drill, otherwise a complete bolt on kit. Made from all new components, all high quality to take the abuse of a 3 point!

Will fit the following tractors without Rear PTO:

800, 1000, 1250, 1450, 1650

I think it will fit the 129, 149, 169 also but have not mounted it up yet.

If your tractor is a manual lift, you can still use this with a spring assist!

PARTS ARE UNPAINTED EVEN THOUGH THE REAR PLATE IS YELLOW IN THE PARTS PICTURE!! Picture shown is on a 1650.

I will try to answer as many questions as I can. Email me at [email protected]

Price: $550.00 - FREE SHIPPING via UPS!! Ships in 2 boxes.

82894.jpg

82895.jpg

82896.jpg
 
Kohler #26 and #30 carburetor rebuilding service for your 10, 12, 14 or 16hp Cub Cadet. I can rebuild your carburetor for $55 labor plus parts. If you do not have a carburetor core, I sometimes have them for sale or already rebuilt. Fast turn-around time and all shipments insured. Call or email. My phone number is 434-996-5549. I have rebuilt dozens upon dozens of these carbs with no failures or problems to date. Every part is disassembled and cleaned, repaired, or replaced.
 
Hello all
i have a Koler 7hp out of an CCO i dont know a lot about it other then it ran good when i loaded the tractor on the trailer and then drove it off the trailer it didnt smoke ore have any straing noises in the motor its a complete motor with the oil bath air cleaner oops there is NO starter generator i can get pick if needed if you have any questions shoot me an email im asking $150 OBO
 

Latest posts

Back
Top