• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

782 Front electric PTO 'click'?

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tkhoffman

Well-known member
Joined
Oct 2, 2013
Messages
615
Location
Northern NEW YORK
displayname
Tony Hoffman
Working through some wiring on the 782.
With Engine Off...If I just put 12V to the single wire connector coming out of the front 'Clutch' Should I hear a noise of engagement if it is functioning correctly?
 
Thanks. I assumed that is the way it works.
Just Check'n
Good advice.. Even if I don't hear teh clickk I can see it the Pulley is 'locked ' with the switch ON.
 
I could be wrong on this : But I think the electric PTO`s get 12 volts to engage and then the voltage is dropped with the two position switch to hold the magnet in place with lower voltage . I though 12 volts constant will damage the PTO coil causing an over heat and burn out or short.
1a_scratchhead.gif
 
Back
Top