• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

1a tiller question

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ekincaid

Well-known member
Joined
Nov 6, 2016
Messages
741
displayname
Ethan Kincaid
What size bolts should I use for the bottom pivot arms where they attach to the rear end/pto pulley I put a new top belt on now the tiller cocks to the “passengers” side of my 149 I did notice quite a bit of slop in the lower bolt I’m questioning,I’m wondering if I mixed up the bolts some where along the line
 
What size bolts should I use for the bottom pivot arms where they attach to the rear end/pto pulley I put a new top belt on now the tiller cocks to the “passengers” side of my 149 I did notice quite a bit of slop in the lower bolt I’m questioning,I’m wondering if I mixed up the bolts some where along the line
They should 1/2 " diameter link pins.
20200208_211049.jpg
 
Ok thank you the po used bolts that were incorrect and I duplicated the mistake with new hardware
 
I picked up some Clevis pins at the hardware store last night...that fixed me up thanks for the info fellas
 
Back
Top