• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.

    Why Join?

    • Exclusive Access: Gain entry to private forums.
    • Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
    • Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

1978 1450 just.purchased

IH Cub Cadet Forum

Help Support IH Cub Cadet Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

houseofdiesel

New member
Joined
Oct 21, 2024
Messages
2
Location
Kemptville, ON
I needed to replace a Toro 265-6 1995 after a part failed and wasn't viable $$$ to fix. So after looking around a month found a 1450. Serial number 622580. Nothing special condition wise but it runs well and cut the grass/leaves today just fine. I picked it up in the dark last night not realizing a couple things-hand speed control not a foot pedal and no brakes? There is a clutch pedal it seems or is that actually a brake pedal (must he depressed to start engine)?
It is a beautiful machine, steers very well and built to last. What should I lnow about preserving it?
 
Thank you for the info guys much appreciated!
Verified the brakes do work on left pedal. Are they wet brakes or caliper/disc as parts diagram shows both and I forgot to look (tractor is parked at my property an hour away).
It is slow cranking with a fresh battery even boosting with truck battery, wiring looks old and wondering if starters are known to need care after all these years or just refreshing cables/connections/contacts.
Getting new belts soon and will do fluids/filter once it is put away for winter.
 
Thank you for the info guys much appreciated!
Verified the brakes do work on left pedal. Are they wet brakes or caliper/disc as parts diagram shows both and I forgot to look (tractor is parked at my property an hour away).
It is slow cranking with a fresh battery even boosting with truck battery, wiring looks old and wondering if starters are known to need care after all these years or just refreshing cables/connections/contacts.
Getting new belts soon and will do fluids/filter once it is put away for winter.
I seem to recall the hydros had disc/caliper brakes and the gear drives had wet/internal brakes. Most likely a 1450 has disc brakes. I’d clean up your wiring connections especially the grounds. You can check your starter with a set of jumpers directly to the starter. If it turns over quicker than you have an issue with wiring.
 
I seem to recall the hydros had disc/caliper brakes and the gear drives had wet/internal brakes. Most likely a 1450 has disc brakes. I’d clean up your wiring connections especially the grounds. You can check your starter with a set of jumpers directly to the starter. If it turns over quicker than you have an issue with wiring.


No...there is a serial number break. Early had external brakes, 3/4" front spindles, and an iron lower grille housing. Late had internal brakes, aluminum axle tubes, 1" front spindles, aluminum lower grille housing, and the same style steering wheel used on the 82 series. Gear drive vs hydro is irrelevant.
 
The Quietline series is like the red headed stepchild of the IH line.... overlooked but really nice when they're taken care of. My 1450 has been so reliable and always ready to go... Enjoy it, it's fairly easy to work on and will outlast your basic needs if you take care of it.
 
No...there is a serial number break. Early had external brakes, 3/4" front spindles, and an iron lower grille housing. Late had internal brakes, aluminum axle tubes, 1" front spindles, aluminum lower grille housing, and the same style steering wheel used on the 82 series. Gear drive vs hydro is irrelevant.
Be interesting to know what the serial break is. I have a 1650, S/N 2050670U639488, with 3/4" spindles, new style steering wheel and internal brakes. Not sure on grille housing but think it's cast iron.
 
632502 should be the break according to the parts lookup. I wonder if someone changed out the front spindles on your tractor at some point.
 
Paul Bell wrote...
IH service bulletin S-3497, dtd 7/11/77 states that models 1250, 1450, 1650 changed to internal wet brakes as follows:
S/N 604164 to 605308 internal wet brakes
S/N 605309 to 605726 external disc brakes
S/N 605727 and above back to internal brakes.
Since the bulletin is dated before QL production ended, I assume they stayed with internal brakes until production of the 82 series started.

Service bulletin S-3336, dtd 3 Sep 76 states that effective 6/30/76 and with S/N 590522, 1450's and 1650's will have the new automatic check valves which replace the manual valves.

Service bulletin S-3497, dtd 6/11/77 states that beginning with S/N 597245, the 1250's changed over to the new automatic check valves.

The above information was originally supplied by Myron Bounds
 

Latest posts

Back
Top