• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

1811 stopped pulling

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jdtaylor

Member
Joined
Nov 2, 2019
Messages
23
Location
North Carolina
My 1811 stopped pulling, no loss of hydraulic fluid and spiral pin is in place. Any idea of the problem? Have always used IHC fluid.

What is the best way to drain fluid from the hydro on 1811?
 
Does it not work in either forward or reverse? Might be a relief valve. Could also most likely be a clogged filter. Use 923-3014 or 723-3014. Best and really the only way to drain the fluid is by removing the rear cover. You will need a new gasket 921-3015 or 721-3015. Clean the differential housing with brake cleaner, and wipe with lint free rags. The Hytran capacity is 7 qts. These fill much easier with a relief valve removed to allow venting of the unit. Otherwise, the fluid will burp often making it a slow and messy refill.
 

Latest posts

Back
Top