• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

1/2 scale IH 60 Conser till Chisel Plow

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sblunier

Well-known member
Joined
Aug 4, 2006
Messages
4,826
displayname
Steve Blunier "Mr. Plow" (Central IL)
Next project.....1/2 scale conser till plow to go along with the 370 disk and 520 plow.
Steel order went in last weekend, should be able to pick it up this week. Tillage parts are already here.

Video link to a real one....

20200222_131611.jpg
20200118_225725.jpg
20200118_225739.jpg
20200118_225747.jpg
20200119_203500.jpg
20200119_203555.jpg
20200111_114808.jpg
 
Last edited:
Shank assembly and some of the cut components of frame
 
Designed for 5" on shanks and 2" on coulters. 5x2" = 10" of total shank. I can pull 16" of moldboard with turbo diesel or 2072. .625 ratio

Big chisel is 13x4" =52" vs. 6x16" = 96" of big moldboard. .54 ratio

I fully expect it to take all my Super Cubs have to pull it a 5"......but I bet I can put on a good show at 3.5 to 4"!!!!😁😁😁😁
 
Done, just needs test and paint.....nothing left to build! Hyd cylinder just got painted and once its dry, I'll have full functioning chisel. I dont think I'll add the weights, pretty tight fit, might get to be "too much".....if I do, it will be a few weeks, everything is shut down!

Today I got the transport lock done, added SMV bracket, hyd. Hose support, and a bunch of tie down loops from 3/8" and 1/2" round bar ( you have to be able to easily tie it down on the way to the show!!!) 😁
20200321_194220.jpg
20200321_194154.jpg
20200321_194149.jpg
20200321_194140.jpg
20200321_194053.jpg
20200321_194037.jpg
 
Back
Top