• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Search results

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    For Sale

    For sale: 200, 3/8" x 1 1/2" SPIROL Pins 300, 1/4" x 1 1/2" SPIROL Pins These are new. I bought them years ago in bulk and have used/sold many of them. I am selling all 500 pieces for $120.00 shipped to the lower 48 states. That's less than a quarter each. I'm not looking to sell small...
  2. B

    For Sale

    SPIROL Pins I forgot to mention, if you want to pick them up in Plainfield, IN 46168 then I will sell all for $100 My pictures are all over the file limit. I believe everyone on here should know what a SPIROL pin looks like but will try to retake them with smaller file size if you want...
  3. B

    For Sale

    For sale: 200, 3/8" x 1 1/2" SPIROL Pins 300, 1/4" x 1 1/2" SPIROL Pins These are new. I bought them years ago in bulk and have used/sold many of them. I am selling all 500 pieces for $120.00 shipped to the lower 48 states. That's less than a quarter each. I'm not looking to sell...
  4. B

    Paint Question

    Purchased some paint (Cub Cadet -99, 759-3945) for a mower I'm rebuilding. Very little information on the can, non for thinning or cleanup. I tested a small amount with mineral spirits and it congealed so I assume it's enamel paint. If thats correct what is the correct thinner for this...
  5. B

    How do i test a fuel solenoid?

    well I was correct about how to test it. Turned out there was a tarnish on the body of the solenoid. I used a scotch brite pad to clean it and then it tested correctly but would not work with the ignition. Removed the ignition and wire connector, cleaned and crimped all the...
  6. B

    How do i test a fuel solenoid?

    I have an 18hp B&S Vanguard, twin It starts and runs for a few seconds then dies. Acts like no fuel. I have checked the pump & filter. Both are good. Getting spark when it dies. Plenty of fuel in bowl when it dies. I thought the purpose of the fuel solenoid was to stop the flow of fuel...
  7. B

    Replacing plastic front end?????

    Yes, I'm well aware of that and that they are quite expensive. I checked about a year ago, total cost at that time was over $$700. I nor the owner can justify that expense on plastic parts that will eventually end up the same as the current parts. Cracked & busted. I believe I can...
  8. B

    Replacing plastic front end?????

    My buddy has a 1993 CC 2084. It is one of the many models that came with a plastic hood, side panels and grill. The grill was trash when I first started doing repairs on this tractor. One panel was broken but I was able to patch it together. I was able to create a new grill from scrap metal...
  9. B

    Magnum 18 Front Crankshaft Seal

    6 hours and no leaks! Fingers crossed!
  10. B

    Crankcase Breather WARNING! (maybe)

    Thanks for all the replies!
  11. B

    Crankcase Breather WARNING! (maybe)

    Finished patio! Need to complete landscaping around it but that will wait a few weeks. As far as I could tell there wasn't any issue with the CC breather valve. This engine has a steel reed valve type with a heavier steel "keeper" (?) stoping it from opening to far. I replaced the mesh and...
  12. B

    HELP! Governor trouble

    Apparently, the eighth time is a charm! Checked everything while installed, then removed and started over. put all back together and it's a beautiful thing. Runs like a chinese watch! Runs very well and no oil in breather.
  13. B

    HELP! Governor trouble

    2184 with kohler command mag pro 20 (CH 20, 64509) Had to replace the CC breather gasket and screen. Marked gov. shaft, gov arm and holes where spring was before I removed them to get to the breather cover. ran great before now it's like governor is not working. have to turn key off or it...
  14. B

    Crankcase Breather WARNING! (maybe)

    I have a 2184 with a Kohler Mag. 20 (rather my buddy has but I work on it so much it might as well be mine). Removed the air filter and noticed A LOT of oil was getting sucked through the crankcase breather hose and into the filter/carb. I removed the CC breather cover and saw that the...
  15. B

    Magnum 18 Front Crankshaft Seal

    I recently had this problem on a mag 20. The service manual said to instal at a depth of .314 inches. I did and it was tight but not as tight as a seal usually is. Failure came within 2 hours! The next seal was installed at a depth of about .15 inches. Much tighter! I installed it just...
  16. B

    DUMP VALVE QUESTION

    An update. I cleaned around the valves then removed them one at a time. Neither seemed stuck. I made sure both moved. then replaced them. After I repaired all the stuff in the next paragraph I brought the tractor to my house parked it in the garage and noticed it would roll freely so...
  17. B

    DUMP VALVE QUESTION

    Thats the picture I was looking at. If they're manual there would have to be some way to compress the button on the valves, correct (lever or something)? When I pull up the part on "CC PARTS LOOK UP" it has a very nice color picture of what I believe is an auto valve. If this is the case...
  18. B

    DUMP VALVE QUESTION

    should there be a dump valve similar to the those on older IHCC's, Located at the top of the pump or is it internal? The ports at the top of the pump are plugged. been awhile since I had the cover off but I noticed it was different than the early models.
  19. B

    DUMP VALVE QUESTION

    thank you gentleman! I will investigate farther.
Back
Top