• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Search results

xtreme motor works
Shop deals on ebay
Advertise with us
cc specialties
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. E

    pliers

    looks like hog ring pliers
  2. E

    tire chain alternative

    I picked up some 4 ply belted tires and used sabre saw to cut tread off. I used a piece about 3 inches wide behind the normal metal cutting edge and it has worked well for me. I know we dont get a lot of snow. It seems to work somewhat like a squeege too.
  3. E

    Fancy

    I know how hard it is loosing a pet.I felt like Fancy was the pet of the forum. I feel like the forum has lost something special.
  4. E

    Cub Cadet 582 with handyman parts.

    Matt that tool is great for removing or installing tubeless valve stems but does not help in holding the valve of a tube. No provision for applying air to the tube.
  5. E

    Geezer

    I don't know if anyone has read on another site that Geezer has passed 7-25-15. There is more in fo on Cub Collector site
  6. E

    Archive through June 16, 2015

    for part info look on this site CubCadetOnline.com and look under commercial 2001 and before. The bad news is it states call them. I just looked up a 1972 model 3312 mower.
  7. E

    Gas Prices

    saw 1.95 yesterday in Jeffersontown Ky
  8. E

    Archive through March 19, 2014

    tim my 122 coil failed on weekend. I went to autozone asked for 12v internal resistor coil and got a confused look. I then asked for a VW coil I think 1968 and checked in the box said was internal resistor and been running ok for couple of years now
  9. E

    Finn cresent werench

    When in high school in FFA we sold Finn Tool cresent wrenches. I had a 12" and my grandpa had a 10". I lost mine in the field working on tractor and my uncle got the tool box that my grandpa kept in his trunk.I did not get a chance to get the 10 from my uncle before his passing. I was hoping...
  10. E

    102

    looks good Paul
  11. E

    To AG, or not to AG?

    I have cc plastic coated 75 lb and I use a piece of 4x4 and set the weight on the 4x4 and tilt into wheel and then slip the bolt in saves lifting the weight
  12. E

    R/W tractors-mowers

    Paul enjoying your post of r/w mowing.We had an old fellow that mowed for our county with a Ford Jublee and side mount mower.He could hardly walk due to age.They told of one time he drove off the end of a bridge into the creek.He said to the guys well they must have shortened the bridge since...
  13. E

    Archive through January 14, 2013

    HydroHarry you can adjust points when the engine is running. You loosen the lock down screw and put screwdriver in the slot of the points to open or close points then when timing is where you want it tighten screw to lock and then recheck timing. I did my 301 last summer after using static...
  14. E

    Archive through November 28, 2012

    Very good advice for snowy weather !!! The Blizzard and the Blonde It was snowing heavily and blowing to the point that visibility was almost zero when the little Blonde got off work. She made her way to her car and wondered how she was going to make it home. She sat in her car while it...
  15. E

    Zero turn ? what should I buy ?

    Don I went to Cub dealer and HD Wed and Thurs for the cub test drive challenge and drove both the rzt and rzt-s.The S series has steering wheel and seems to be less touchy when driving and manouvering.In talking to the reps they stated the S is better on slopes.On the S when turn steering all...
  16. E

    Look what i BoUgHt!!!!!!!!!

    Dennis cop ign did not eleminate problems.They can still carbon track in the boots and then have to replace coil.Also some of the cop systems use a plug with super long tip below plug threads and seat that can carbon up in the head and break off when trying to remove the plug.So technology just...
  17. E

    Hf electric winch

    thanks for input Brad.Today went to granger and got dpdt momentary switch disconnected origional and wired in works so far without relay.Going to go to hardware store and get plastic switch box and will have mounted to right fender top but works. Switch I used was 1xwt1 granger item and is a...
  18. E

    Hf electric winch

    thanks for input Brad I had in my mind center contacts of switch power in so I will get a switch I have to test with if works then will get spring loaded one.ED
  19. E

    Hf electric winch

    I have a hf small electric winch on my cub and am starting to have problems with the switch.The switch is hand held with 2 push buttons one in and one out.I took apart and switches are inclosed in housing.It has red and black wires in from battery and red and black out to winch motor.Does anyone...
  20. E

    Massey 261 w/ 236 loader problem

    Glen another thought are the lines to fender mounted control valve hard connected or in quick connectors.Have you tried switching those if in the quick connects
Back
Top