• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Search results

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. E

    To Rebuild or Just Leave As Is

    If you use kroloil (the best, though expensive). on the lock ring and let set awhile, it will take a blunt punch and gig hammer. With it loose the pipe should come free
  2. E

    129 low power at full throttle

    Look at your spark plug. White = lean. Brown=Normal. Black to rich, oil
  3. E

    Beru Ignition coil

    Been using a gm 12v coil with a resistor for many, many years
  4. E

    I need a pic of 2284 carb linkage

    The spring that's unhooked is for keeping the two lever and rod tight.
  5. E

    Merry Christmas

    MERRY Christmas everyone Price, , Heath. Prosperity. Perseverance to all
  6. E

    No crank on a 4 year old LX1 Kohler 22hp.

    If you can manually turn it just past the dead spot. It should crank thru to start. Make sure your battery and starter are good.
  7. E

    2166, runs and stops

    check spark, none replace the coil
  8. E

    Motor oil

    Any thoughts on varnished gas disposal? Beside a great ant killer. Have a lot these days
  9. E

    Parts Wanted Haban sickle mower

    Heating shop can bend one to keep the finger and other things safe until you find a sheath.
  10. E

    Funny Ads

  11. E

    Idles Rough a lower speeds, and with blades engaged acts as if it’s bogging down. Any suggestions

    Make sure the fuel is getting to the engine. Pull the fuel line running from the pump to carb. Put the hose in a jar. Spin the engine over to observe the amount off fuel delivery. Should be a good pulsating stream.
  12. E

    Had to make noise

    There are charts on the web and most fastener suppliers that show what drill and taps are needed. Both metric and standard. Heli-coils can be used in some instances.
  13. E

    LEST WE FORGET

    Please give thanks' to those that gave some and thosse who gave all
  14. E

    Funny Ads

    Rat Tractor
  15. E

    Had to make noise

    Rod is destroyed, which mean crank is also. Time for new innards if block is ok.
  16. E

    cub 149 steering

    Doe's it start cold, but not hot?. If it doe's then you have a coil / spark issue
  17. E

    Flywheel

    The puller bolt looks like it's covering the flywheel boss. The bolt should only touch the crank.
  18. E

    Cub Cadet 1330 PTO clutch switch won't stay engaged without holding the clutch switch on

    Hold the switch up? Could be the switch needs replaced. Most switches stay either on or off.
  19. E

    Solenoid

    Just saying that the larger capacity 12v battery passes more current through the smaller cable the the 6v cable.
Back
Top