• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Search results

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. A

    Archive through January 27, 2016

    We did have a couple of sets that were bent along the wrong axis and they are too long and too narrow. Here is a pic of the parts on our shelf and an original one.
  2. A

    Archive through August 30, 2015

    Here is a couple of pics of the tiller kit mounted on an XMW 3 point.
  3. A

    Archive through August 30, 2015

    Hey Guys - just wanted to throw it out there that we have the Cat 0 3 Point Tiller Adapter Kits reproduced.
  4. A

    Archive through July 09, 2015

    Hey Guys, Been working on some new stuff. Thanks for all your support over the years. Have a new push pull bracket for the cyclops so you dont have to take your brackets off every other season. Also along with a new fender kit for the 70/100's we came up with a tool tray that...
  5. A

    Archive through February 24, 2015

    Well Ill tell ya it looks like Mike can outpaint me.... My stuff needs some paint...
  6. A

    Snow thread 2015

    Boy I wish we would get some snow here in Minnesota. We have had, according to the airport, 11.7 Inches on the ground this year. Some spots the grass is still poking thru. Bad year for snow blowing and snowmobiling....
  7. A

    Archive through February 24, 2015

    Heres what I did with the blade quick attach. It takes 1 min. to put the blade on and off... plus it will lift the tractor front off the ground if I want.
  8. A

    Archive through February 24, 2015

    Mike, That red looks so nice... Kind of a red die hard guy... love the 82's. If summer allows I an going to take my 2086 and turn it into a magnum series tractor.
  9. A

    Archive through February 07, 2015

    Heres a pic of the valve under the cover..... It is tight - driveshaft is 3/8" of an inch from the bottom of the plate. Some new tires on our new 4" wide x 12" rims. I know the one is backwards, its cause its from the other side. Tires are Verdestine 7-12's and are 27.5"...
  10. A

    Archive through February 07, 2015

    Thanks guys. You could run the cylinder off the second factory circuit if you had dual hydraulics or you could put in a diverter valve and split a single system. It was a little more work to do the 4 system but worth it in the end. Ps. Working on a new blade angle kit. Stay tuned.......
  11. A

    Archive through February 07, 2015

    Been Playing around a little in the shop lately on some new projects. Just thought that I would share some pics.... Independent 3 point lift divorced from the deck lift. The valves for the 3 point and a second set of ports on the back. the left lever is up / down and float. the right...
  12. A

    Archive through February 08, 2015

    I can get a 1" roller bearing - double sealed, with lip, to fit my hubs that has a dynamic load of 2970 lbs. but they are $30 per bearing! There are options with out lips to keep the bearing from working into the hub but that would require a inner spacer to keep the bearing in place.
  13. A

    Archive through February 08, 2015

    Steve, Yes for a loader you will want to go to the 2000# hubs and spindles. Shock loads are just too great for these smaller bearings. I am looking at 1" tapered bearing hubs to fit the stock spindles, but the stock spindles bend easy.
  14. A

    Archive through February 08, 2015

    Steve, They are the HD roller bearings as the original rims use. The object is that a guy can use the bolt on rims instead of the traditional rims. This opens up a lot more in the aftermarket rim world. The 1" bearing rims are getting hard to find in good shape. We are doing heavy...
  15. A

    Super Garden Tractor Cat O and 782D Cat O

    As long as you don't have a rear pto they will fit. The lift rods are longer on the SGT and we carry them. Not sure on the SGT tank, but it will clear cause the lift rod runs next to the frame.
  16. A

    Archive through February 08, 2013

    Steve B - point taken! Better watch the rammin speeds on them hard drifts. Michael M - the plates were done on a Finn-Power Turret. They are part of some larger door panels that got rejected, so I just couldn't let them go to the recycler. Im kinda a hoarder of metal at times. LOL
  17. A

    M18 Teardown

    Nice write up, thanks! I have torn apart a few of these engines and usually when they let go, seems like i am left with junk...
  18. A

    Archive through February 07, 2013

    I cant wait till this page rolls over at 50 cause them huge mellons keep creeping me out! Sheesh..... Im going to go back to welding now! LMAO!!
  19. A

    Archive through February 08, 2013

    Now that i have the highway blade done, and waiting for it to snow here in minnesota, i got another project done. I have always wanted to do this to see how it would look. Seems to build up so much heat under the hood in the summer with the side panels on, so i thought this might help. It...
Back
Top