• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Search results

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    1882 deck on a 1862 ?

    I use a low pressure electric pump on mine. Haven't had any issues.
  2. C

    1882 deck on a 1862 ?

    I have a 50C deck under my 1862. I got it that way so, I don't know for sure if anything was modified but works great. I have wondered if there is a speed up pulley for the deck that will work with the 1862 5/8" PTO.
  3. C

    1862 BAGGER

    Mostly everyday grass, leaves not as big a problem on my property but, may try to pick up leaves as well.
  4. C

    1862 BAGGER

    Yes Sir, Thanks, just curios if it was even worth looking in to.
  5. C

    1862 BAGGER

    Anyone have any experience with a bagger in a 1862 with a 50C deck? Any suggestions as to what components to use?
  6. C

    1862 AXLE BEARING

    Does anyone know what the Timken, SKF bearing number for the rear axle bearing 941-3033A? Thanks
  7. C

    1862 FUEL PUMP

    Thanks, Jeremiah. Looks like shipping from them might be a little slow but, I will call them. If you look at Facet model numbers on the net, its a little unclear what model they are using. You're right though, great site.
  8. C

    1862 FUEL PUMP

    Hello All, I lost the fuel pump on my 1862 with a M18. The new replacement pumps look a little cheap and I don't know how well they perform. Does anyone have any experience with them? Or does anyone have any advice about a low pressure (what PSI?)electric pump. This one is mowing every...
  9. C

    1862 With a Kohler M18 question

    Thanks for everyone's help. I found the fuel shut off valves on both sides clogged. I cleaned them out and it seem to run well. Hopefully my son will get the mowing done today. I will update you all if there are any further issues.
  10. C

    1862 With a Kohler M18 question

    Thanks again for the help, all of the above have been checked except for the gasket. I work on heavy equipment for a living and have been fooling with the older cubs for a while but the boiling gas kinda had me puzzled. Really appreciate your help.
  11. C

    1862 With a Kohler M18 question

    Matt, Also, I was looking at the diagram for the spark tester, I'm assuming you need to ground the tester correct? Thanks,
  12. C

    1862 With a Kohler M18 question

    Thanks Matt, That's was exactly my plan. I looked at the manual and they refer to some photos that don't show up well enough to see. Did you have any thoughts on the boiling sound coming from the carb at shut down? I actually poured a little gas in the carb one time and it sounded like it was...
  13. C

    1862 With a Kohler M18 question

    Does anyone have the ohm check procedure for the ignition module on this unit. The manual pictures are not very clear. The engine shut down after about an hour mowing. I noticed the spark looked weak. Went out the next morning and it fired right up. Also when you shut it down after running hard...
  14. C

    Wanted To Buy

    Looking for a used starter pulley (one on the crank that has the PTO clutch basket attached) for a 129
  15. C

    Archive through July 26, 2016

    Thanks to all for your input. I will let you know what I see when I get it apart. Got to finish my son's original axle bushings & seals first.
  16. C

    Archive through July 25, 2016

    I have a 129 and the starter pulley on crankshaft worked loose. I haven't pulled it down yet but has anyone ever tried to repair the pulley hub? I am pretty sure its damaged.
  17. C

    1862 steering

    Im still going over the 1862. The power steering and hydraulic lift were noisey. Changed the hydrostatic oil and filter and observed a little water contamination. Everything functions fine and the transmission is not excessively noisy. Anything I need to check or is this normal?
  18. C

    1420

  19. C

    1862 FLYWHEEL

    Thanks Matt! I will keep my fingers crossed, I am supposed to pick it up today.-Chris
  20. C

    1862 FLYWHEEL

    Came across a 1420 with a MV14 Kohler, any chance the flywheel will work on a M18? They look The same but I have not removed either one.
Back
Top