• FIRST AND LAST NAMES ARE REQUIRED WHEN REGISTERING

Search results

Advertise with us
cub cadet used parts
xtreme motor works
shop deals on amazon
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

  1. T

    Number three trailer

    Bend, eh? I'm just over in North Idaho. Does it have a good axle? Are the bearings ship shape and in Bristol fashion? I'm a 147 Hydro kinda guy.
  2. T

    ISO gear for electric lift

    Well, i guess $100 isn't so bad, Houtz wants $150 plus shipping.
  3. T

    ISO gear for electric lift

    Well, no other "help" with this?
  4. T

    ISO gear for electric lift

    thank you
  5. T

    ISO gear for electric lift

    New, good used, gear to get my 147hydro lifting again. # IH 530793-R1. Thank you, in advance, and yes i am trying to avoid paying around a hundred dollars for a gear that is a little bigger than a silver dollar.
  6. T

    Archive through March 21, 2014

    New picture to share. This is the day it came home. Still work to be done, but the engine is rebuilt, new wiring harness installed, power shower applied. Next is the Hydro dump and refill with a filter change. then on to getting the tiller and mower deck operating.
  7. T

    Archive through February 16, 2014

    <font color="ff0000">WANTED</font><font color="000000"> Headlamp retainer for CC 147 Hydro. Right side as seen from the operator's seat.</font>
  8. T

    Archive through March 21, 2014

    Woot! Actually started this restore last fall. Here are some of the picts of when the engine first came out. She was a dirty girl resting in a barn after nearly four decades of use with no more maintenance than the oil services and an occasional spark plug. Full engine and carb rebuild are done...
  9. T

    Archive through February 20, 2013

    Hey All, Anybody used/had any luck with the crank balancing kit available from Kirk Engines Inc.(above sponsor/advertiser)? Rebuilding my new K321, am pulling the balancing gears per strong reccomendation and ran into his kit while parts shopping.
  10. T

    Archive through February 18, 2013

    Thanks Guys, (Bill T., Terry D., Wayne S.,Harry B.) Indeed did find a nice one. Machine Shop should call yet this week with info on what parts to order. I've been thinking about going with a metal governor gear if I can find one. This little K321 isn't in too bad shape. Any reccomendations on...
  11. T

    Archive through February 18, 2013

    Wayne S- What? Those little ol' balancing gears? Yes, gone. They will make a nice set of paper weights. I can't quite seem to get my pictures small enough to upload here, so I put them up on flikr if anyone is interested: http://www.flickr.com/photos/terry_mc-sharephotos/sets/72157632798930587/
  12. T

    Archive through February 17, 2013

    Well, I went an' did it. Got a 147hydro from a local farmer. Pulled the engine and broke it down over the weekend. Looks like we'll be going 10 over on the new piston/rings with a new rod, 10under on new crank/rod bearings (depending on the machine shop report), a new set of valves and a new...
  13. T

    Archive through January 04, 2013

    I have been told that THIS is where I should introduce myself, so I will just copy what I already said and add, "Hey, Y'all!" Incredible, after all these years, it looks like I will once again be a CC owner. It is lookin' good for a 147 Hydrostatic to come and live with me. Possibly including...
  14. T

    WooHooo Come Home to Papa

    Thank you all. I wondered where the appropo spot would be.
  15. T

    WooHooo Come Home to Papa

    Incredible, after all these years, it looks like I will once again be a CC owner. It is lookin' good for a 147 Hydrostatic to come and live with me. Possibly including the mower deck, front blade, roto-tiller, and maybe even a snow thrower! We removed the carburator for dip cleaning, checked...
Top