Search results

Help Support IH Cub Cadet Forum:

  1. RayF

    CC 108 "Snow Blade" spring install.

    As the title says, I have a CC 108 and the correct snow blade attachment... I had the blade mounted last year for snow-duty.... but it never materialized. This year, I took the blade apart, ( It was pretty rusty) and had it sandblasted. I painted it with POR-15, and primed it with epoxy primer-...
  2. RayF

    SURE! Make me go out and wash my CC-108....

    This is my 1973 Cub Cadet 108 -purchased from the son of the original owner- in 1996. It was worn and tired, smoked, and the deck needed work. But it cut my yard beautifully. I worked on it alot from year-to-year... replacing spindles, pulleys, belts, and having the motor rebuilt in 2000. I...
  3. RayF

    Cub Cadets at local Tractor Show

    Didn't really know where to post this... My local chapter of the Studebaker Drivers Club- was invited to attend a local Tractor Show- The T'Ville Power Show in Thomasville, NC. There were several Cub Cadets there. If I had known.. I would have brought mine... since my Studebaker isn't roadworthy...
  4. RayF

    FOR SALE: 1996 Cub Cadet 1430 Lawn Tractor- Good Condition $200

    SPRING CLEANING!!! 1996 Cub Cadet 1430 Lawn Tractor $200 FIRM! One family owned, purchased new by my brother-in-law. I've had it since 2006 - Kohler Magnum 14HP Twin Cylinder engine- well maintained, no smoke, - Fresh oil and filter change, greased, new belt, - Good Hydrostatic Drive (brand...
  5. RayF

    Anyone seen this before? IHCC Road Grader...

    This just came across my newsfeed on Facebook... Link to the YouTube video...
  6. RayF

    1993 CC-1430 Hydrotatic Dump Valve not working (can't push the tractor)

    I have a 1993 Cub 1430 Hydro. It has a 14hp Kohler and everything operates as it should. However. I don't use the tractor, so I don't keep a battery in it... Occasionally, I need to move it so I can mow around it, or just give the grass under it a break. When I push the dump-valve lever forward-...
  7. RayF

    Linear Actuators

    Has anyone here used a 12V Heavy Duty Linear Actuator as a deck/sleeve hitch lift? I'm considering buying a Heavy Duty (225 lb push/pull) Linear Actuator to control my home-built sleeve hitch. I need a little over 4" of total throw- so I'll probably go with a 6" to be sure I have plenty of...
  8. RayF

    108 Decal location needed...

    On my refurbish thread, I asked where these (3) decals went. I've established that my tractor does not use the Hydro decal, or the Lift decal. However, the Caution decal is for the battery compartment. Can anyone post a picture of where- around the battery compartment- this decal goes? TIA!!
  9. RayF

    Refurbishing my 108

    You may have already seen my post about my Kohler K241 rebuild (Kohler 241 Rebuild/Restore) ... so here is the rest of the tractor... Mower Deck Before: The underside was sandblasted , and coated with POR-15. Mower deck sanded (240G) and Primed (PPG Omni Epoxy) Mower Deck with (2) Coats of...
  10. RayF

    Stripped Steering gear for 1430 (1015- 1730 tractors)

    Hi all... As the title states, I have a 1430 with a stripped steering gear Part # 748-0236. I'm looking for a CHEAP used one... I really don't know what I'm going to do with this tractor, as the deck is rusted beyond repair. I'm not going to put much money into it.... but I'd like it to steer if...
  11. RayF

    Custom 3-Point Hitch for my Cub 108

    This was the last project I started to build for my 108, before the Camshaft broke way back in 2008. I wanted to add a 3-point hitch, so I could pull around a garden cart, utility trailer, and my boat. I designed and built this, taking cues from an OEM type sleeve hitch. I had some nice steel...
  12. RayF

    Cub 108- Driveshaft

    I need a (straight) driveshaft for my 1972 CC 108. The original driveshaft has always vibrated. It's not the bearing or mounts. It is bent slightly at the drive end. I tried straightening it in a lathe using a dial indicator, but without alot of success. It was probably damaged during a bearing...
  13. RayF

    Kohler 241 Rebuild/Restore

    I just completed a rebuild of the K241 10HP engine for my Cub 108. It received: New camshaft, used crank, Gaskets, new aftermarket carb, thorough cleaning and paint. I also had many parts zinc-electroplated years ago. The upper cylinder (fins) were painted with POR-15 black engine paint, and...
  14. RayF

    Old member

    Hello again all! I was a member here years ago (2006-ish I think)... but my last post may have been around 2008. I tried to find my old account, but I was no longer in the archives. I wasn't very active, but you all helped me out before with a few things. I have (3) Cub Cadets- a 1972 CC 108, a...
Top