Kirk Engines, Inc Cub Cadet Used Parts CADET CONNECTION Cub Cadet Specialties Cub Cadet Specialties

Search results

Help Support IH Cub Cadet Forum:

  1. J

    Installing Magnum 18hp Kohler in 682 Cadet

    I am installing a Magnum 18hp Kohler in my 682 Cadet. Is it necessary that the mounting plate which is the same for the KT17 Kohler be used for the 18hp? If the mounting plate is not used, could there be a clearance or alignment problem?
  2. J

    PTO Switch on Cub Cadet 1811

    I am having trouble with PTO switch not wanting to stay engaged on my 1811. Is this a clutch adjustment issue?
  3. J

    Cub Cadet 682 w/Kohler Magnum 18

    Have installed Kohler Magnum 18 in my 682 Cadet. Installed a used clutch, only one wire to connect. When the engine starts, clutch is engaged. What have I not done correctly to be able to start w/o clutch being engaged? Thanks for the advice.
  4. J

    Roll pin problem on Model 1811

    Roll pin problem on Model 1811. The roll pin (1/4 x 1 1/2) that fits in the coupling (cast) on the output shaft of the Hydro wants to fall out after running for a short period of time. I have had the problem before, replaced roll pin with the correct size (1/4 x 1/1/2) and it has lasted for over...
  5. J

    # 1A Cub Cadet Tiller Pulley

    Has anyone had experience on installing the vee belt that runs from the gear box to the large pulley on a # 1A Cub Cadet Tiller? I have the correct length belt. I did this six months ago but needed to work on the rear end of my cadet with the hitch on it. There is a simple fix but I cannot...
  6. J

    Model 1811 Pulling Roller, Just Stopped Pulling

    Model 1811. While pulling a water filled roller, the tractor stopped pulling. Transmission oil level is OK and no lose of oil. Both roll pins are in place on the driveshaft. What could cause this problem? Would the two valves in top of the transmission have anything to do with this...
  7. J

    Ported Hydro Transmission

    I have a Ported Hydro Transmission, info on tag 90-1226 CCW 05-84-12-18578. Not sure what model it was in. Is there any reason why this transmission cannot be installed in a Model 682? Thanks, JDTaylor
  8. J

    Replacing belt from gear box to large pulley on #1 CC Tiller

    Help on replacing belt from gear box to large pulley on #1 IH CC tiller. What is necessary in order to make adjustment to allow putting this on? Tiller mounts to 1650 cadet. I see nothing to allow any movement other than what is stated on depth adjustment in #1 owner's manual.
  9. J

    How to install long belt part #487045RZ

    What is the best way to install the long belt part # 487045RZ from the PTO pulley to the rear gear box on a Model 1650 with a #1A tiller? I have taken all the adjustment on the front tension pulley and still cannot get belt to catch on gear box pulley!
  10. J

    Gear Box and Plow attached?

    Is it possible to have a gear box mounted for use with #1 Tiller and still be able to mount the bracket to attach a plow? If not. what do you see as a solution?
  11. J

    Cub Cadet 1811, hydro transmission

    Transmission isusing some oil, have only used cadet transmission oil and no visible sign of leaks. Is it possible tranmission is "consuming" the oil internally? Have thought about using IH tractor hydraulic oil. I used this years ago and believe this may be a better grade of hydraulic oil.
  12. J

    Model #1 Cub Cadet Tiller

    I own a Model #1 Cub Cadet Tiller. How do you check the fluid level for the chain drive and what oil is used. Do not see a check plug and nothing is shown in the operator's manual. I plan to mount this on a 1650, what width drive belt from PTO to gear box should I use? Thanks.
  13. J

    Hydrostatic Transmission Problems - Model 1811

    I have an 1811 Cub Cadet Hydro, recently installed 2 rebuilt valves on transmission and it has worked great. On Friday I was pulling my leaf vacuum and the Cadet stopped, no movement forward or reverse! No signs of oil leaking from transmission. Roll pin on drive shaft is in place. How do you...
  14. J

    Cub Cadet owner

    Have couple of cub cadets that live in North Carolina with me.
Top