Kirk Engines, Inc Cub Cadet Used Parts CADET CONNECTION Cub Cadet Specialties Cub Cadet Specialties

Search results

Help Support IH Cub Cadet Forum:

  1. glippert

    Mystery Lift Bar and...

    I'm splitting my 782, to replace the seals in the hydro pump, repair the trunion slot, etc. I was surprised to see that the 3 point lift bar is not straight. And it doesn't have just one bend - it looks like a meandering river, with two bends, first up, then down. Does anyone know what...
  2. glippert

    782 Hydro Leak

    I finally decided to believe that Spring is here, and I removed the snow thrower (QA42A), chains, wheel weights, and rear weights from my IH 782 (s/n 682355). And, since it will be a little while before I need to install the tiller, I decided to finally change the cork gasket to cure my hydro...
  3. glippert

    1650 Starter Gear

    Looking for a good 10-tooth pinion gear for a Quietline starter (1250, 1450, 1650). Must be in good condition - no chipped/broken teeth.
  4. glippert

    1650 in Tough Shape

    This probably won't be a full refurb, but I know I'll have a lot of questions, so I decided to just start a new thread for it: I'm finally getting around to working on a 1650 I got about three years ago. It came with the motor removed, along with everything else under the hood (gas tank...
  5. glippert

    1250 Drive Shaft Flange Assembly

    I don't see the disclaimer anymore that there are no stupid questions, so this might be one. The flange assembly that attaches to the cup on the flywheel (just outside the grass screen) has a bushing that centers the drive shaft. Should the outside of that bushing be lubed with anything? It...
  6. glippert

    1250 Drive Shaft Flange Assembly

    I don't see the disclaimer anymore that there are no stupid questions, so this might be one. The flange assembly that attaches to the cup on the flywheel (just outside the grass screen) has a bushing that centers the drive shaft. Should the outside of that bushing be lubed with anything? It...
  7. glippert

    Manual Lift Arm

    According to FAQ #78, the top thumb button should unscrew from the rod in the manual lift arm. Is this the same on all models? The top button and the rod of my grandson's 1250 work fine, but the bottom L-bend is worn pretty thin by the ratchet, so I'd like to have it built up, or maybe even...
  8. glippert

    Brake Parts for 1250

    I'm looking for a pair of good used brake stators (#18 below),preferably with usable brake pads still on them, and a shoulder bolt and nut (#20/21 below). Somehow, my grandson lost these parts from the left rear wheel on his 1250.
  9. glippert

    Is there a prize?

    Is there a prize for the worst follower stud in a steering box? My grandson's 1250 had extremely sloppy steering. In addition to front wheel bearings falling apart, I found the follower very loose. I removed the sreeting assembly, took off the lever plate and found this: No wonder it...
  10. glippert

    Draft thread?

    I started a thread, then hit a wrong button and found myself back at the main forum page. Is my "draft" thread saved somewhere, where I can preview & post it?
  11. glippert

    Archive through February 05, 2019

    Ron S - Great description of the cork gasket replacement process. I've got it saved for future reference. What a great forum!
  12. glippert

    Archive through July 06, 2016

    Looks like Charlie will be having a rebuilt PTO sale one of these days. You know, since he has nothing else to do all day! (Imagine a "Poking the Bear" emoticon here)
  13. glippert

    Archive through June 21, 2016

    Harry - Yes, I left the original fuel shut-off on the tank.
  14. glippert

    Archive through June 08, 2016

    When I ordered some parts last week, I was impressed with how quickly I received them. Lo and behold, turns out I forgot a few things, so I put in a new order. Again CC Specialties had the parts to me less than 48 hours after I placed the order. But I do have one complaint: Although Charlie...
  15. glippert

    Archive through March 17, 2014

    Doug & Dave - Thanks for the reply on my hydro valves. Doug - I guess it must have been in the FAQ where I saw it. Thanks for the reminder. Sometimes it sucks getting old! Greg
  16. glippert

    Archive through December 04, 2013

    Dang archive bug! Here's the 5-day forecast that will keep me out of the garage until the heater is fixed!
  17. glippert

    Archive through November 17, 2013

    Mike P - I got my QA-42A out of storage this weekend and into my garage, next to the 782, but it's not mounted yet. And despite the IH marketing that Charlie posted, it takes me a lot more that a few seconds to get it mounted. Each year, when I finally get it on, I think I'll remember the...
  18. glippert

    Archive through June 21, 2011

    Bill R - The best Cub ever built? The one you have a chance to get next! You need one for each attachment, you know. I've got four Cubs and two kids, and I couldn't choose the "best" in either category. They're all great!
  19. glippert

    Archive through March 13, 2011

    Jeremiah - I have a Vanguard on my 782 and replaced the front rag joint assembly with a u-joint. It works good for me. Of course I'll need to replace the driveshaft if/when I go back to the Kohler.
  20. glippert

    Archive through February 28, 2011

    Kenneth P - Gear drives may be simpler, but don't you feel you're missing out on something special by not having a "do-hickie flapper?" Actually, having watched and read photos and conversations on clutches, broken shifter forks, etc, I'll stick with my hydros! Oh wait - I almost forgot, I...
Top