• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

The biggest Cub Cadet garden tractor?

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
this is in the 50"mower deck operators manual.

Scan2023-04-07_175226.jpg
 
What I have seen so far from the posts - 1. International Cub Cadet manual says nothing about WOT?
2. An unknown deck manufacturer for an unknown GT or LT says WOT for best results for cutting grass.
3. Kohler engine manual for some International Cub Cadets says 80% throttle is recommended.
I see a pattern of conflicting recommendations, none are probably wrong, all under the right circumstances could be right. We are all not commenting on the same tractor (International), engine (single cylinder Kohler), deck or mowing conditions. So, "correct" answers will vary widely.
 
I like the lower illustration. They ought to put that one in all owner's manuals. On second thought, why bother. No one reads the owner's manual anyway. Maybe they could permanently mount it on the center of the steering wheel. :errrr:
Almost every time I travel down the road and see someone mowing, they are blowing everything out in the road. I cringe when I go by, expecting something to come crashing through my window.
 
Manuals are just another man’s opinion!



I like the lower illustration. They ought to put that one in all owner's manuals. On second thought, why bother. No one reads the owner's manual anyway. Maybe they could permanently mount it on the center of the steering wheel. :errrr:
Almost every time I travel down the road and see someone mowing, they are blowing everything out in the road. I cringe when I go by, expecting something to come crashing through my window.
 
Just tallied up how many times I mowed with the 982 between 2010 and 2015, I deleted the couple times I mowed with the 70 & 72, 61 times in 6 years. Typically took 4-1/2 hours to mow the 2-3/10's acres, lots and lots of trimming! So saying I put 4-1/2 hours on each mowing that Ccounts for 275 of the hours on the hour meter. I know the last 2-3 years I used the 982 it would start sputtering and new plugs, new plug wires, carb adjustments didn't help, just a new set of points and a condensor. I'M sure Onan parts have NOT got cheaper but they were $165 from The Cummins Engine parts shop in Minneapolis, Mn. I replaced them twice in consecutive years and bought the Tank.
The B48G engine is out of production, not sure who makes rebuild parts, but like Kohler parts they are stupidly expensive. I'll run my 982 till it needs points & condensor and then it's going, going, GONE! If a Kawasaki engine was an easy bolt -in I'd do that, but it's not that easy.
Since I've been on IHCC.Com we've discussed operating temp, over-heating, lugging, running wide open about 100 times. The MOST KNOWLEGIBLE of US, Dave Kirk knows the relationship on air cooled engines and rpm and engine temp. I'm sure he's done hours and hours of dyno pulls. I've even discussed putting guages on my K321 in my #72, head temp, oil temp, EGT, RPM. Maybe someday! Last time I checked there wasn't enough dash space for that many guages.
 
Looking at a 2182 with a 3 point hitch. Going to use a box blade to move some stone and dirt. Without a hi/low transmission, will this tractor be able to move a decent amount of material. Has the Kubota engine. Thanks
 
Last edited:
Put it this way, does the tractor have enough low end torque without bogging down quickly under load without a low gear option? The Simplicity Legacy is similar and offers a hi/low option. Differential locks certainly help traction as well.
 
Last edited:
Not that it is directly related to this thread but I will ask anyway.
When did IH get out of garden tractors? I really would have thought Cub Cadet would have been almost a core business. Certainly not a big division but a substantial one and with long time name recognition.
 
Thanks @Doug Rusk and @bjames
Way back then I was working traveling all over the country and just trying to make a living and feed the family. I didn't pay any attention to it then. Now I find myself being fascinated with keeping a few extra garden tractors around to use when the urge strikes. Much appreciated on the replies.
 

Latest posts

Back
Top