• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Dual action hydraulic cylinder for a 2182 & a Haban 54-inch front mount blade.

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

John Halper

Active member
Joined
Aug 21, 2020
Messages
29
Location
Atco N.J.
Anyone know where I can get a hydraulic cylinder for the angle adjust for this combo? It now has a manual set up on it. Along with correct hoses & connections? Are Tractor Supplies, cylinders of 8 or 10 inch acceptable replacements?
 
I've seen a lift cylinder from a 1450/1650 and others from that era used as the angle cylinders on the IH plows

s-l1600.jpg
 
John you will need a beefer cylinder than that. I found a good after market cylinder online and went to local hydrolic shop to makeup hoses. I try sending pictures of my setup when I get of PJs
 
I've seen a lift cylinder from a 1450/1650 and others from that era used as the angle cylinders on the IH plows

s-l1600.jpg
i have used one of these, however, i dont plan on "USING" it, it is more for show. i would believe if i was to put it to work as intended, i would bend the rod.
 
The gentleman that uses the lift cylinders to convert manual plows has thoroughly vetted his plow and it takes everything he has managed to throw at it.
 
Cylander has 1inch shaft.
 

Attachments

  • image.jpg
    image.jpg
    486.9 KB · Views: 0
  • image.jpg
    image.jpg
    736.2 KB · Views: 0
  • image.jpg
    image.jpg
    502 KB · Views: 0
The gentleman that uses the lift cylinders to convert manual plows has thoroughly vetted his plow and it takes everything he has managed to throw at it.

That may be, but...I have seen many, many, many pretzeled tilt cylinders posted here over the years. The later ones switched to a ~1" dia rod for a reason.
 
Back
Top