• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Deck Rebuild

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mikemartin

Well-known member
IHCC Supporter
Joined
Feb 26, 2022
Messages
69
Location
Madison, Ms
I have a 1985 Cub Cadet 1711 Hydro (photo below). The deck needs to be rebuilt. I cannot fix anything but my tractor guy can fix most everything. He says we need the complete hub assemblies for the three hubs on this 44" deck: pulleys, hubs, bearings and seals. Is there a source for these items? Are their bearing rebuild kits in the event that the assemblies are not available? Thanks for any advice.
Mike Martin; Madison, Ms
 

Attachments

  • 2022-05-29 May 30 2022 003.JPG
    2022-05-29 May 30 2022 003.JPG
    1.2 MB · Views: 4
  • 2022-08-22 August 22 2022 #2 008.JPG
    2022-08-22 August 22 2022 #2 008.JPG
    825.9 KB · Views: 0
  • 2022-08-22 August 22 2022 #2 009.JPG
    2022-08-22 August 22 2022 #2 009.JPG
    831.7 KB · Views: 0
  • 2022-08-22 August 22 2022 #2 010.JPG
    2022-08-22 August 22 2022 #2 010.JPG
    936.5 KB · Views: 0
  • 2022-08-22 August 22 2022 #2 011.JPG
    2022-08-22 August 22 2022 #2 011.JPG
    857 KB · Views: 0
I have a 1985 Cub Cadet 1711 Hydro (photo below). The deck needs to be rebuilt. I cannot fix anything but my tractor guy can fix most everything. He says we need the complete hub assemblies for the three hubs on this 44" deck: pulleys, hubs, bearings and seals. Is there a source for these items? Are their bearing rebuild kits in the event that the assemblies are not available? Thanks for any advice.
Mike Martin; Madison, Ms
Spindle assemblies as well as rebuild kits are still available.
https://www.ccspecialties.org/deck_spindles.htmlhttps://www.ccspecialties.org/implementparts_2.html
 
To confirm, is part # 126393-C1 the correct hub/spindle/bearing assembly that is needed for this deck (44" from a 1985 CC 1711.)? Those are expensive, about $300 each. The bearing rebuild kits are about $47 each. Should I consider that route? Thanks for the help. Mike
 
To confirm, is part # 126393-C1 the correct hub/spindle/bearing assembly that is needed for this deck (44" from a 1985 CC 1711.)? Those are expensive, about $300 each. The bearing rebuild kits are about $47 each. Should I consider that route? Thanks for the help. Mike
IH-126393-C1 is the speedup center pulley.
 
Can you advise what are the correct numbers for the 3 assemblies? For a stock unit that was cutting fine (but those assemblies are worn out and making a lot of racket) is the 'speeup' needed? Sorry to ask but I know little.
 
If your pulleys are still good you can get the spindle assembly W/O pulley. All 3 use the same one.
Untitled.jpg
 
None of your pictures show which spindles you have. If they all are the aluminum housing version, the bearings are super cheap anywhere that sells bearings, as they are an extremely common bearing. Seals are available OEM from CC or aftermarket.
 
Back
Top