cubs4lifeofme
Well-known member
Will the rears interchange without modifications ?
-
This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.
Sign up here: https://www.ihcubcadet.com/account/upgrades
1810 to 2084 rear swap
- Thread starter cubs4lifeofme
- Start date
Help Support IH Cub Cadet Tractor Forum:
mgonitzke
Well-known member
No. 2084 has a different ratio reduction gear, and the hydro pump input shaft is splined, and they hydro is ported. 1810 has a round shaft for a coupling attached with a spirol pin, is not ported for aux hydraulics. You cannot swap the transaxle or hydro unit with that combo and have it work.
Paul Schwab
New member
My 1811 hydro is dead. The outside pin was broken and I replaced but still did not move. Any suggestions? Can you tell be any model rears that will work with 1811? The present hydro was grabbing and I think I would just like to replace the whole rear,but I can not find an 1811 rear.
mgonitzke
Well-known member
Does the hydraulic lift still work? Is the fluid level correct? When is the last time the filter has been replaced? If all of that is ok, it is possible the little pin that drives the charge pump has sheared off.
These units are very reliable and it is pretty unusual for them to fail.
These units are very reliable and it is pretty unusual for them to fail.
1811Cub
Well-known member
1979-1989 782/782D/1806/1810/1811/1812/1711/1712/1210/1211 and I'm sure I'm missing a few models will interchange hydro units/diffs. 1979-early 82 will be the good cast iron IH built units, but the later aluminum rears are good too.
