• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Recent content by jhangartner

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. J

    Archive through May 24, 2014

    1981 782. This is an older restoration I took it down to the bare frame and repainted everything about 5 years ago. It has some scratches from use these days. This is what I put in it when I restored it. New driveshaft and rag joints. 1811 steering gear. The steering linkage has all heim joints...
  2. J

    Archive through March 30, 2014

    The hitch and weight bracket are sold pending funds
  3. J

    Archive through March 30, 2014

    Brinly box blade modified. I added a heavy steel bucket edge to the bottom of the blade, added bigger sides, and scarifier teeth. Also not seen in pic is a post on the top back to stack weights so it can do the work. sorry for the poor pic. I will get it dug out soon. I used it to level out 100...
  4. J

    Archive through March 30, 2014

    Custom front weight bracket and weights. Made out of a mule drive to fit wide frames or 82 series. 4 30lb weights. fits on your tractor just like a mule drive. Quick to take on and off. Perfect for the light in the nose 82 series. $120 picked up in Cedar Rapids. Will not ship this item.
  5. J

    Archive through March 30, 2014

    Brinly sleeve hitch adaptor. floating and non floating lift straps, double bracket for the rear end, pins, etc.. everything shown in this pic. Hitch is not bent or twisted. $125 picked up in Cedar Rapids. I will ship at additional actual cost. Please respond to email.
  6. J

    Archive through March 19, 2014

    Brinly sleeve hitch adaptor. floating and non floating lift straps, double bracket for the rear end, pins, etc.. everything shown in this pic. Hitch is not bent or twisted. $125 picked up in Cedar Rapids. I will ship at additional actual cost. Please respond to email.
  7. J

    Archive through March 19, 2014

    Tires are sold....Thank You!!
  8. J

    Archive through March 19, 2014

    Vredestein V61 tires 16x6.50x8 with tubes. All are new and never used. Dirty from sitting around in my garage. $80.00 for all picked up in Cedar Rapids.
  9. J

    Archive through May 07, 2013

    For Sale: Brinly Sleeve Hitch 10" Moldboard plow. Some light surface rust on painted beam and plow face and coulter. Good point, plows great. Contact for pics. [email protected] $150 picked up in Cedar Rapids, IA This picture is a couple years old the shiney parts are a...
  10. J

    Archive through July 29, 2009

    Found my tiller. Thanks guys
  11. J

    Archive through July 29, 2009

    WANT TO BUY..... Tiller and gearbox to put on my 782. I would prefer a #2 with the 5/8 belt pullies, but would consider a 1A with extensions and do my own conversion. Also am looking for a later 5/8 mule drive for the same 782 Somewhere within 200 miles of eastern Iowa only. Thanks...
  12. J

    682 Axle Question

    generally the cast rears have the coarse splines. However that may vary as I have a 782 with a cast rear end and it came with fine spline axles. If you have a spare rear end out of the tractor it would not be too hard to pull the cover off and check. then you would know for sure.
  13. J

    82 series front weight bracket

    Thank You for all of the compliments. This mini project was fun and easy. Now if I could just find all of the parts to build a Cat 0 plow.
  14. J

    82 series front weight bracket

    Here are the finished pics as promised
  15. J

    82 series front weight bracket

    The weights I use on the rear are just like the ones on the box blade. I just transfer them back and forth depending how much weight I need on the blade at the time. I have 2 cross braces and a 1" threaded rod in the center of the rear wheels which I can hang whatever weights I want on at...
Back
Top