• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Recent content by dcmay

kirk engines
Shop deals on ebay
xtreme motor works
Advertise with us
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    Archive through February 16, 2015

    Kraig&Marlin, You confirmed my thoughts as I have only seen the pto and nothing ever connected.Seems like that would have been a place for design of a rear rototiller vs the long $100 dollar belt.
  2. D

    Archive through February 15, 2015

    What implements are used with rear pto?
  3. D

    Archive through October 03, 2014

    My wife reminded me that I quit buying Cub Cadets 2 years but have acquired 6 of them since.
  4. D

    Archive through October 02, 2014

    Keith O. Usually when you install a new follower that takes care of the tight spots.The gear is much harder than the follower and that is why if you try to adjust the play out of the steering you end up with real tight spots.A good question why didn't I.H. roll those threads over the entire...
  5. D

    Archive through September 28, 2014

    This happened to me one time when I was having trouble with a 1450 running like it should.I had worked on it 3 or 4 different times with same result.Still didn't run right.Finally pulled the engine to make sure it was in time.It was in time and this time I changed the stator.That cured my...
  6. D

    Synthetic oil

    Do any auto manufacturer recommend synthetic oil in their engines?
  7. D

    Archive through September 20, 2014

    Regarding synthetic oil,does MTD or any other manufacturer of lawn equipment recommend synthetic oil in there engines?I have used 30wt low ash for thirty some years and have never thrown a rod or burned a piston.I also have never run any of my engines wot to mow or rototill.I was once told here...
  8. D

    Archive through September 13, 2014

    Thanks Don. The 52 & 60 are from quiet line I guess as they have the longer reversed choke lever.
  9. D

    Archive through September 13, 2014

    Can anyone tell me which carbs were built with the 10,12 14 16hp Kohlers? I have a #26,30,52,& 60. I never kept track what engines they were on.
  10. D

    Archive through August 27, 2014

    Forgot! How about $3500
  11. D

    Archive through August 27, 2014

    I have about 1/4 million cub cadet parts,all 1981 and older with a few which I will list. 6 voltage regulators 10 pairs old reflectors 2 starter/gen pulleys w/new machined centers 3 pto clutches 3 electric clutches 2 12 hp Kolers need overhauled 1 10 hp w/new piston,rings and rod(ready...
  12. D

    Archive through September 01, 2014

    Over the years I haven't paid much attention to which carb goes with which engine and recently I put new rings,piston and rod in a 14hp.The owner has a new #26 carter and says it bogs down when he engages the deck.He has an older #30 carter that has some problems but the engine doesn't bog with...
  13. D

    Archive through August 18, 2014

    Dennis. I have a pair of those black plastic weights that I was thinking about using because of the skid problem.I am kinda thinking 5o more pounds may not be enough to eliminate the problem but 150# would.
  14. D

    Archive through August 15, 2014

    Yes my 782 has 4 hub caps.I have been mowing with a 1450 with weights and I have a sharp turn that goes down hill.The 1450 never slid down the hill but the 782 does.I will try with a pair of white weights and see if they stop the skid.
  15. D

    Archive through August 15, 2014

    I recently found a red 782 and almost looks like new.Can some one tell me what wheel weights were on the red ones? I also tried to send a picture of my 70 but the message went but pic didn't.Too big I think.When I get that figured out I will get a pic of the 782.What a machine it is.
See more
Back
Top