• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Painting the rims or not

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Bill Trammell

Well-known member
Joined
Mar 2, 2022
Messages
81
Location
West Union, Iowa
Working on cleaning up my 1440 and not at all impressed with nose, hood and side panels as designed and built - during this I was preparing for rear wheel removal and sand blasting when I found like-new available ones. Chips and scrapes in paint. I repainted the inside of wheels and wire brushed inner lip bead sealing area - when I decided to ask you all this: Best to paint the inside bead seal or leave wire brushed. I intend on using tubeless new tires. Thoughts are certainly appreciated and welcomes. Thank you to all who have opinions.
 
I would say it is best to paint that area. No need for potential future pitting and damage due to rust. From the factory, most of them were fully covered.

s-l1600.jpg
 
I would say to paint them also, I worked for goodyear service and tire for a while when younger. the bead should be protected to prevent rust from forming. as a pretreatment I use a product called "ICI 1 STEP" brush on 2 coats 30mins. apart and it converts rust from an active oxide into a neutral carbon and it is primer / paint ready. about $70.00 per gallon but it goes a long way and works on and metal rusted surfaces. follow instructions and you can't go wrong!
 
p.s. a bead sealer is a good idea also, like the Permatex brush on gasket sealer adhesive (purple or brown both work- brown is a bit thicker) it fills minor voids and cleans up easy when servicing tire down the road. apply to the rubber tire bead.
 
I would say to paint them also, I worked for goodyear service and tire for a while when younger. the bead should be protected to prevent rust from forming. as a pretreatment I use a product called "ICI 1 STEP" brush on 2 coats 30mins. apart and it converts rust from an active oxide into a neutral carbon and it is primer / paint ready. about $70.00 per gallon but it goes a long way and works on and metal rusted surfaces. follow instructions and you can't go wrong!
Hey Mark, Is that product similar to POR-15? I've used that on a number of jobs and was really happy with it. I did the battery box on my 2284 and spot painted some decks anf blades before repainting. The only difficulty was reopening a can that was used.
 
NEVER used the pro15 product so I cannot say for sure, I think por15 is a multiple step product from what I remember. so for now I can only recommend ICI 1 STEP from personal experience.
 
I have never used any of that stuff.
Don't it still leave the uneven rust and rust jacked covered surface??

I'd much rather see clean, uneven surface that can be properly primed and treated and painted and let the bead sealer do it's job
 
Last edited:
I have used POR-15 on ATV fuel tanks to plug pinhole leaks and it worked great for the next 12 years that we owned the ATV, I have also used it on rims off of 40 to 90 horse tractors. On the larger rims I wire brushed them good and then used POR-15 on them and it left a nice smooth surface and they have held up very well. I also used their clear coat on polished aluminum truck rims and after 8 years they still look great, in my opinion POR-15 is far more than a bandaid.
 
I have used POR-15 on several projects including complete car frames. If the metal is prepped correctly, the POR is like powder coat. It will not come off unless you grind it off. You need some rust on the component as POR chemically bonds with it. One car frame was done thirty years ago and still looks good.
By proper prep, I'm referring to making sure all the loose rust has been removed. When I did my frame, I had it sandblasted. Then I applied a metal etch and rinsed it off with water. Left it sit for a couple of days to build up some rust flash. Painted it with a brush. POR can be topcoated with paint if desired.
 
i’ve knocked it down with a wire wheel and then painted it with rust reformer paint and then used the majic paint IH white from TSC. be aware though that the majic stuff goes on like pancake batter and needs several days to dry properly. seems to hold up good for me.
 
well, I can only say this one last thing about ICI 1 STEP. it does not leave a thick coating on the metal, it is a liquid (like milk) penetrant which gets into the poor of the metal and converts rust chemically, works like Alodine to protect aluminum from corrosion on aircrafts. this is why i highly recommend this product. and as i said it is ready for primer / paint after easy brush application treatment. so, for a starter test run i have bought smaller quantity's for about $30.00 a quart. a small price to try out and let the product prove itself to you.
 
Thank you --- ALL. I just finished painting the beads on both wheels --- just happened to have barely enough in one spray can to do the job nicely. Now on to the hood and side panels. Nose has been reinforced, sanded and painted with cleaned lens and grill --- looks awesome === Bill
 
Key words here!!
David,
The phrase is a bit subjective. Per POR instructions, one needs to wire brush all of the loose rust off of the component. The part also needs to be free of any oil or grease. The coating does require surface rust to be present. I typically clean all of the rust off just to get a better, cleaner surface. It lays down much nicer and dries smooth. Otherwise surface irregularities would be present. The main use would be for underbody components such as frame, suspension, floor pans, inner fenders, etc.
Compare that to painting, the metal needs to be absolutely clean and rust free. It also needs to be finished sanded with 320 grit or finer or else scratches will show up through any topcoat. Ideally, the first primer coat would be metal etch or epoxy primer. Sealer is also recommended prior to topcoat. Painting would be more labor intensive and expensive comparatively.
I've done both and POR is generally easier to work with as well as being more durable.
 
Sandblast Prime and paint. Or don’t bother doing anything else. After I painted my rims I used “Murphy’s oil soap tire bead sealer” That’s what we use in the auto field when mounting tires on aluminum rims. Seals good if it’s a problem slow leak
 
also, this link.

https://www.fecoservice.com/files/CUB_CADET_PAINT_1961-2007.pdf
Cub Cadet Yellow and White/Beige Paint 1961-2007 1961-1989 Part No. Color Description Alternate # Size 759-3259 White IH#935 11.5 Aerosol 759-3264 White IH#935 1 Quart Part No. Color Description Alternate # Size 759-3258 Yellow IH#483 11.5 Aerosol 759-3263 Yellow IH#483 1 Quart 1990-1998 Part No. Color Description Alternate # Size Paint Code 759-3735 Beige Powdered 11.5 Aerosol -0499 759-3736 Beige Powdered 1 Quart -0499 759-3674 Beige Powdered .6 oz. Bottle -0499 Part No. Color Description Alternate # Size Paint Code 759-3588 Yellow Powdered 11.5 Aerosol -0498 759-3589 Yellow Powdered 1 Quart -0498 759-3692 Yellow Powdered .6 oz. Bottle -0498 1999-2006 Part No. Color Description Alternate # Size Paint Code 759-3735 Beige Powdered 11.5 Aerosol -0499 759-3736 Beige Powdered 1 Quart -0499 759-3674 Beige Powdered .6 oz. Bottle -0499 Part No. Color Description Alternate # Size Paint Code 759-3940 Cub Yellow-99 11.5 Aerosol -0716 759-3945 Cub Yellow-99 1 Quart -0716 759-04055 Cub Yellow-99 .6 oz. Bottle -0716 2007- Part No. Color Description Alternate # Size Paint Code 759-3735 Beige Powdered 11.5 Aerosol -0499 759-3736 Beige Powdered 1 Quart -0499 759-3674 Beige Powdered .6 oz. Bottle -0499 Part No. Color Description Alternate # Size Paint Code 788S04021 Cub Yellow 2 11.5 Aerosol -4021 788L04021-QT Cub Yellow 2 1 Quart -4021 788T04021 Cub Yellow 2 .6 oz. Bottle -4021 The Other Cub Cadet Paint Colors 1980-1985 Part No. Color Description Alternate # Size 759-3259 White IH#935 11.5 Aerosol 759-3264 White IH#935 1 Quart Part No. Color Size 759-3260 Red 11.5 Aerosol 759-3265 Red 1 Quart 2003-2006 8000 Series Part No. Color Description Size Paint Code 759-3735 Beige Powdered 11.5 Aerosol -0499 759-3736 Beige Powdered 1 Quart -0499 759-3674 Beige Powdered .6 oz. Bottle -0499 Part No. Color Description Size Paint Code 759-3940 Cub Yellow-99 11.5 Aerosol -0716 759-3945 Cub Yellow-99 1 Quart -0716 759-04055 Cub Yellow-99 .6 oz. Bottle -0716 Part No. Color Description Size Paint Code 759-04061 Cub Day Gray 11.5 Aerosol 2007- Utility Vehicle (Limited Edition) Part No. Color Description Size Paint Code 788S04021 Cub Yellow 2 11.5 Aerosol -4021 788L04021-QT Cub Yellow 2 1 Quart -4021 788T04021 Cub Yellow 2 .6 oz. Bottle -4021 Part No. Color Description Size Paint Code 788S0685 Cub Blue 11.5 Aerosol -0685 2007- Cub Cadet Yanmar Part No. Color Description Size Paint Code 788S04021 Cub Yellow 2 11.5 Aerosol -4021 788L04021-QT Cub Yellow 2 1 Quart -4021 788T04021 Cub Yellow 2 .6 oz. Bottle -4021 Part No. Color Description Size Paint Code 788-0691A Black Jack 11.5 Aerosol -0691 1980-2007 Part No. Color Description Size Paint Code 759-3262 Gloss Black 11.5 Aerosol -0637 Part No. Color Description Siz
 
Back
Top