-
This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.
Sign up here: https://www.ihcubcadet.com/account/upgrades
mgonitzke's latest activity
Help Support IH Cub Cadet Tractor Forum:
-
mgonitzke replied to the thread Trans oil change.3000 series does NOT use HyTran...it uses the Cub Cadet branded "Drive System Plus", or alternatively one of the engine oils mentioned... -
mgonitzke replied to the thread CC 147 Kohler K321 Head Gasket replacement.Plastic scraper will work good for the piston. You can use a wire wheel on the valves if you are careful not to hit the piston. Might...
-
mgonitzke replied to the thread 782 engine swap, wiring sanity check.
-
-
mgonitzke replied to the thread Paint problems.Any farm store rattle can you buy that is "Cub Cadet Yellow" is most likely the orange-yellow used on the cyclops and 2000/3000 series...
-
Bruce, FYI, the original posters questions were about a gear drive cub, not a hydro. By all means, DO NOT USE 30 weight oil in your...
-
mgonitzke replied to the thread Used Engine Swap.If it is from a Cub Cadet it will drop right in. Carb is specific to engine size, not year.
-
Pretty simple answer, The paint is junk, then the paint under the clear coat wasn't dry enough, even though you might have thought is...
-
mgonitzke replied to the thread Paint problems.Clear coat not compatible with the paint or you applied it the wrong amount of time after spraying the paint.
-
Now tha you have the piece out, run a pipe tap through the threads to clean them up
-
and don't for get the rod size needed after checking the crank it may need ground undersize if it is out of spec. If you are going to...
-
mgonitzke replied to the thread IH Cub Cadet 70.You will be very disappointed if you don't. That is not usable in that condition.
-
mgonitzke replied to the thread Mating Driveshaft to none standard engine.The 582 Special and 580 had an engine like that and would interface to the driveshaft in the same way as the 782. It may simply work by...
