Thanks Matt and Roland. The blade is front mounted and works fine, I couldn't see any place to hook up the lifting bar on the rear like on the 1650. I have the manuals on order if they don't help I will accept you offers, I will let you know. Thanks again.
In The Heart Of Dixie
First, Welcome to the forum
The 1811 has an Aluminum Rear End in it. Mounting the 3 point Sleeve Hitch type of system (ie: 1650) can be done BUT, it will require some modification and fabrication. If you are not willing to do that, than the previous post would be correct. If you are interested, shoot me an email and I can send the data.
The 1811 uses a different style of 3 point hitch than your 1650. The 1811 uses the category 0 type of 3 point, which is a bit more heavy-duty than the Cub Cadet style 3 point on your 1650. Unfortunately, this means that your attachments from your 1650 won't fit the 1811. You'll need a different style of 1-bottom plow, and I'm not sure about the blade. As for pictures, I have an 1811 but it doesn't have a 3-point on it. I do, however, have the service manual for this tractor which has installation instructions. If no one posts pictures in a couple days, I can scan a page or two from the manual to show you what this looks like.
There's always room for one more.....
I have ask at other forum w/no luck. How do you add a 3 point hitch to an 1811?? Any pictures?? Previous tractor was a 1650 and I have blade and turning plow.
In the Heart Of Dixie