The Original forum for International Harvester Cub Cadet owners






Please check the Frequently Asked Questions (FAQ) before posting your question -
perhaps it has already been answered there.

While you're at it, please also read through the IH Cub Cadet Forum Rules before posting.
Thanks!!


Got a suggestion for, question about or problem with the site? E-mail us at info@ihcubcadet.com

Topics Topics Help/Instructions Help Edit Profile Profile Member List Register  
Search Last 1 | 3 | 7 Days Search Search Tree View Tree View  
IH Cub Cadet Forum * The Machine Shop  

  Thread Originator Posts Pages Last Post
Look what followed me home this weekend. David Schwandt
 16   09-11-19  06:42 pm
by Mike Frade
Moving into the shop after remodel, storage tip David Schwandt
   08-18-19  12:46 pm
by Dennis Frisk
Evolution carbide chop saw Steve Blunier "Mr. P
 18   03-31-19  11:58 am
by Matt Gonitzke
Machine tools on auction this weekend. David Schwandt
   03-17-19  02:15 pm
by Mike Frade
Bending 1/4 x 3 flat in a press brake David Schwandt
   02-09-19  11:57 am
by Matt Gonitzke
Ross Steering Box Socket David L. Smith
   02-03-19  08:44 am
by Joe Oligschlaeger
Tractor cabs on cubs? Charles Krill
   01-31-19  09:35 am
by Mike Patterson
Sometimes progress really SUCKS!! David Schwandt
   07-22-18  07:10 am
by Joe Oligschlaeger
Looking to buy a new band saw input anyone?? David Schwandt
 18   03-09-18  05:15 pm
by KENtuckyKEN
Electric Power Steering Scott Tanner... Migh
   11-07-17  08:35 am
by Scott Tanner... Mi
Cherry Picker (light) Joe Oligschlaeger
   11-03-17  08:25 am
by Joe Oligschlaeger
Parts Washer John Nicklas
   09-27-17  10:09 am
by Wayne Shytle
Welding table David Schwandt
   05-11-17  06:50 am
by Kraig McConaughey
TIG: The use of thoriated tungsten electrodes KENtuckyKEN
   12-28-16  08:21 am
by Jason Wiggins
Drill Doctor John G.
 10   12-10-16  06:28 pm
by Kraig McConaughey
Identify Drill Bit Brand KENtuckyKEN
   11-14-16  02:16 pm
by KENtuckyKEN
What's in your Toolbox: Rare & Unusual Tools Jeremiah Chamberlin
 22   09-19-16  08:15 am
by Jason Wiggins
Sharpening Mower Blades Steve Shaff
 20   03-27-16  09:51 am
by Charlie Proctor
Industrial lasers Allen Schumacher
   02-01-16  12:15 pm
by Brian Branstetter
Mig Welder size? James MacDonald
 10   08-17-15  09:06 pm
by Mike Frade
Welding Table Joe Oligschlaeger
   07-02-15  06:50 pm
by Allen Schumacher
PULLEY greg papa
   06-05-15  08:39 pm
by Mike Frade
Shop built Tow-behind Brushcutter Clark Miracle
   04-13-15  09:05 pm
by jeff l baker
PortAlign Drill Guide Jeremiah Chamberlin
   02-26-15  07:00 am
by Joe Oligschlaeger
Overhead engine lift trolley David Schwandt
   01-02-15  08:42 am
by David Schwandt
LED shop lights Randy Karoses
   12-26-14  10:26 pm
by Mike Feste
Home built 12 cyl engine Allen Schumacher
   07-20-14  11:24 pm
by Earl Jones
Sears Air compressor Joe Oligschlaeger
   07-08-14  07:51 pm
by Allen Schumacher
Brake Relining Scott Tanner... 149
   05-16-14  09:02 am
by jeff l baker
Hour Meter Internals Jeremiah Chamberlin
 11   10-30-13  05:36 pm
by jeff l baker
Shop press (HF) Wayne Shytle
   10-20-13  03:02 pm
by Wayne Shytle
Finn cresent werench Ed Wells
   10-07-13  07:15 am
by Ed Wells
Valve spring release tool..Which one?? David Schwandt
   07-20-13  07:33 am
by David Schwandt
Compressor issue Chuck Fischer
   06-26-13  05:09 pm
by Adam Briar
Hydro bench-test? Charles Matthew Wayn
   05-22-13  08:13 am
by Kraig McConaughey
Sockets - 6 vs 12 Point Bill Jamison
   05-18-13  08:28 pm
by Luther Ray Hinds
Old Rockford lathe Edward H Lincoln
   04-17-13  11:18 pm
by Edward H Lincoln
Thoughts on a Bead Blaster Paul E. Funk
   04-07-13  08:06 pm
by Paul E. Funk
Cylinder homes Terry Davis
   03-30-13  07:33 pm
by Charles Matthew Wa
Motorcycle Lift for Cubbies Bruce Nolte
 18   03-06-13  10:13 am
by Dennis Frisk
Plasma Cutter - What to get? Steve Blunier "Mr. P
 12   02-15-13  04:27 pm
by Gerry Ide
Govener oil leak! Grant Milton Morris
   01-26-13  03:43 pm
by Charlie "Digger" P
I have a 1864 that I just cannot find a small oil leak william pate
   01-22-13  12:22 pm
by william pate
IH Cub Cadet 1450 Hydraulics Kyle Mathew Culberts
   01-01-13  04:58 pm
by jeff l baker
Electrolysis info Kendell Ide
 70   11-12-12  04:11 pm
by Frank A. Currier
Milling Machines Jim Egstad
 34   10-11-12  08:44 am
by doug hodgson
Broken Tap Removal Ryan McShane
   09-10-12  02:14 pm
by DAVID A CALKINS
Ball hone bryan kiper
   08-24-12  02:23 pm
by Kirk Luthe
Powering 3-ph tools off 1-ph power Dave Kamp
 31   08-24-12  01:38 pm
by Dennis Frisk
Torque wrench James MacDonald
 11   08-12-12  08:06 pm
by bryan kiper
Good Air Compresser? Clark Miracle
   07-25-12  09:05 pm
by Clark Miracle
For motorheads Richard Tunison
   07-03-12  12:07 pm
by Doug. May
Cutting steel Richard Tunison
   06-13-12  05:55 pm
by Jeremiah Chamberli
Power Loss scott reed
   05-18-12  08:10 pm
by Wayne Shytle
Powder Coating Discussion - Answers from a guy that does it for a l... Keith C. Adams
 32   04-11-12  09:25 pm
by Michael A.Masheris
Sons of Guns..........Discovery Channel Gerry Ide
 12   03-29-12  04:49 am
by Jeremiah Chamberli
Air Compressors KENtuckyKEN
 107   01-23-12  05:34 pm
by Jeremiah Chamberli
X mas Tools Donald Tanner
   01-19-12  06:51 pm
by Donald Tanner
Hall Valve Seat Inserter Charlie "Digger" Pro
 25   09-24-11  09:21 am
by Dennis Davis
Sand Blasters & Air Compressors Dustin Sacksteder
 22   08-30-11  09:27 pm
by Wayne Shytle
Flex Honing grits Wayne Shytle
   08-18-11  10:32 pm
by Kraig McConaughey
How old is my littie cub roger hatley
   07-25-11  01:19 am
by Gerry Ide
Delta DP220 Drill Press -Delta Milwaukee Tom Hill
 18   07-14-11  08:45 am
by John Cairns
Welding - general Kendell Ide
 30   07-01-11  08:35 pm
by Gerry Ide
Sheetmetal brake ??? Wayne Shytle
   06-27-11  07:04 pm
by Wayne Shytle
Rear Differential Model 149 Tom Feulner
   05-07-11  09:46 am
by Tom Feulner
Check this out for rust removal Ralph Lowe
   04-14-11  01:54 pm
by Tom Hill
Making new cam followers jeff upton
   03-07-11  09:11 pm
by jeff upton
Anyone build a parts washer? - Tell me what you used Ryan D Wilke
 12   02-03-11  10:13 am
by Tony Henrie
Attaching snow plow Charles Fleming
   01-28-11  01:28 pm
by Kraig McConaughey
Clutch press joe hoeksema
   12-21-10  06:44 pm
by Matt Gonitzke
Old school bumper jack Michael Smith
   12-14-10  08:12 am
by Mike LaMar
Basket Pulley Puller Michael A. Miller
 11   11-01-10  09:36 am
by jerry harvey "Nine
Flywheel & PTO bearing puller Jeff Derstine
   07-01-10  06:10 pm
by Jeff Derstine
Grease gun suggestions James MacDonald
 27   06-25-10  02:37 pm
by James MacDonald
EQUUS 3010 Justin Hokinson
   06-21-10  09:18 am
by KENtuckyKEN
Pipe Bending KENtuckyKEN
 289   06-15-10  08:15 am
by Gerry Ide
Propane Bottle Sand Blaster/Pressure Pot Matthew T Kreek
   06-04-10  02:28 pm
by Dennis Frisk
Cub cadet 127 freewheel lever ken tomes
   05-08-10  02:29 pm
by Allen Schumacher
How do I raise the hitch hight on my 122. lucas donald jones
   05-03-10  05:24 pm
by Dennis Frisk
Paint Sprayer Roy Najecki
 12   04-29-10  10:29 am
by K G Ide
Dualies jeff l baker
   03-10-10  08:42 pm
by jeff l baker
Fitting Bushinngs Bruce Nolte
   01-02-10  03:16 pm
by Kendell Ide
Cat.0 Roof Rake Paul W.Roessler
   12-17-09  11:31 pm
by Paul W.Roessler
$6 Kohler Engine Rotisserie Home of the Plow Spe
   12-14-09  03:34 pm
by Home of the Plow S
CNC conversion Paul E. Funk
   12-10-09  11:38 pm
by Paul E. Funk
Creeper gear problem Mike Tippett
   11-27-09  06:46 pm
by Mike Tippett
Anybody ever upgrade cub front wheel bearings? jason j. smith
   10-27-09  05:40 am
by Myron Bounds
Hydraulic floor jack help James MacDonald
 12   10-24-09  08:24 pm
by Ryan D Wilke
Stainless Square U Bolts James MacDonald
   08-01-09  07:45 am
by Dennis Frisk
Ohm Meter and Battery Charge Tim Malinich
   07-31-09  08:18 am
by Kraig McConaughey
1250 cub cadet hydrostatic drive shaft removal Donald G Schultz
   05-31-09  06:51 am
by Luther Ray Hinds
How to make it fit a cub? jeff l baker
 12   05-30-09  03:41 pm
by jeff l baker
Air compressor pressure switch Kendell Ide
   05-12-09  07:57 am
by Kendell Ide
Changing tires Tristan Stewart
   05-04-09  07:52 am
by Dennis Frisk
50 A deck on my 149 Lisa Scarduzio
   04-28-09  10:56 am
by Paul W.Roessler
Alumiweld Keith LeJeune
   03-17-09  08:35 pm
by Kendell Ide
Analog Tachometers Richard Palmer
   03-16-09  10:18 pm
by Kendell Ide
Stripping engine john hanes
   02-22-09  10:44 am
by Dennis Frisk
Hood ornament Paul W.Roessler
   02-03-09  12:32 pm
by Paul W.Roessler
Plasma Cutter set-ups Kyle Redlinger
 15   01-30-09  12:22 pm
by Kendell Ide
Roll Pin Punches Kenneth Dortch
   01-19-09  11:29 am
by Kendell Ide
Steel ?????????? andrew coffey
 12   01-18-09  10:10 pm
by John Underwood
Rosebud torch Problems Dudley B Currin Jr
   12-26-08  08:09 pm
by DAVID A CALKINS
Kohler Carburetor Main jet Bruce Macdonald
   12-22-08  10:54 pm
by jason davis
Repair Manuals Kim Randall
 13   11-04-08  04:09 pm
by Dennis Frisk
Shop Lights Kendell Ide
 26   10-25-08  02:06 pm
by Kendell Ide
Soluble oil Todd Markle
   10-02-08  08:58 am
by Dennis Frisk
Mini Hay Racks/running gears Tom Hoffman
 12   10-01-08  10:16 am
by Dennis Frisk
18 hp briggs vangaurd in place of kohler? Dennis Johnson
   09-26-08  04:05 am
by Larry Dunlap
Storage for cubs?!?! Charles Krill
   09-04-08  04:53 pm
by Charles Krill
Echo Power Blower Keith LeJeune
   08-28-08  05:35 am
by Luther Ray Hinds
I want to add narrow frame snow blower to a wide frame william pate
   08-12-08  10:19 pm
by Home of the Plow S
Grinding wheel dressers Todd Markle
   07-10-08  06:52 pm
by Kendell Ide
New Airline Kraig McConaughey "K
 17   07-08-08  12:56 pm
by Kendell Ide
Hot vat cleaning doug hodgson
   04-12-08  09:55 pm
by Terry B. Jenkins
Has anyone ever moved the hydraulic control to the foot william pate
   03-19-08  10:08 pm
by steve archer
Handy Shop Charts (that you can never find when you need'em)... Kweaver
 41   01-21-08  12:26 pm
by KENtuckyKEN
Hydraulic power unit Michael A. Miller
 35   12-23-07  12:12 pm
by Michael A. Miller
New Bench Lathe Kendell Ide
 11   12-03-07  03:59 pm
by Lyle Baker
Loader bucket repairs Dudley B Currin Jr
   12-01-07  09:15 am
by KENtuckyKEN
TRYING TO IDENTIFY THE YEAR AND MODEL OF MY CUBBY Richard Kubec
   11-26-07  02:59 am
by Richard Kubec
Welding Aluminum KENtuckyKEN
 14   10-12-07  07:21 am
by KENtuckyKEN
Welding Cast Iron KENtuckyKEN
 19   09-24-07  09:31 am
by Kraig McConaughey
Telescoping Gages David Phelps
   09-16-07  12:14 pm
by David Phelps
Drill Press Repair help needed Christopher Cote
 27   07-27-07  06:10 pm
by Christopher Cote
Fractured sheet metal (CCO pan seat) Curtis Sanderson
   06-14-07  03:51 am
by KENtuckyKEN
Worn Key-Way on Crankshaft (1969 Cub Cadet Mod.124) Barry Craig
   05-12-07  04:15 pm
by Charlie "Digger" P
Old Forum Cub Info files I Saved KENtuckyKEN
   04-23-07  06:12 pm
by Allen Schumacher
Quietline ISO Mounts KENtuckyKEN
   04-19-07  04:48 am
by KENtuckyKEN
New tools in the shop! Dave Kamp
 84   03-30-07  08:37 pm
by Kendell Ide
Couplings Drive Shafts and Cubs Charlie "Digger" Pro
 30   03-17-07  10:27 pm
by Greg Edwards
My Utility Trailer Plans KENtuckyKEN
 35   03-15-07  04:30 pm
by KENtuckyKEN
Home Grown 3 spd. Spreader KENtuckyKEN
   03-07-07  07:06 pm
by Earl Ford
What I did on my day off.... Kendell Ide
   03-06-07  01:06 pm
by Dennis Frisk
Monster's Rear Blade KENtuckyKEN
 18   02-24-07  11:57 pm
by Earl Ford
Drill press recomendations Kyle Moe
 20   01-05-07  04:53 am
by Brian Johnson
Milling splines Matt Creswick
   06-07-06  04:41 pm
by Dan Hoefler
Chris Busch's MIG wire question Bryan D. McMeen
   03-26-06  07:43 pm
by Steve Blunier
Briggs vertical to Horizontal Larry Wright
   03-17-06  09:46 pm
by Hugh Simon
Access to Milling Machine, Northern VA John Mansfield
   03-03-06  10:26 pm
by Hugh Simon
Keith E's Man Land...  
 37   02-15-06  08:50 pm
by Terry Busch
Thoughts on a welder Chuck Jackson
   01-09-06  07:01 am
by Chuck Jackson
Hydraulic press sizing and square holes. Ross Colton
   01-06-06  10:42 am
by Ross Colton
AC Buzz box to AC/DC "Improved" Conversion Complete Jonathan Luckey -*Bu
   01-02-06  05:53 pm
by Dave Kamp
Kohler cylinder boring tool... Dave Kamp
 12   03-25-05  03:13 pm
by Dave Kamp
Dave's relay-logic RPC Dave Kamp
 34   02-28-05  11:10 pm
by Dave Kamp
Homemade slip-roll Dave Kamp
 19   01-24-05  02:46 pm
by Kraig McConaughey
Bought me a lathe Jim Land
   01-23-05  03:01 pm
by Jim Land
Ultimate Home Machine Shop Kraig McConaughey "K
 31   01-18-05  08:46 am
by Charlie "Digger" P
1/4" Cordless Impact Wrench Steve Blunier
   01-12-05  05:26 pm
by Jim Land
  Start New Thread        

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration

9870 registered users
Discus 4.10.1 released 03/14/2007

All core web site images and graphics are the property of the IH Cub Cadet forum. Any unauthorized use, reproduction, duplication is prohibited.

DISCLAIMER:This website contains no material provided by MTD Products Inc, is not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc website and MTD Products Inc is not responsible for any of its content. The official MTD Products Inc, website can be found at: www.mtdproducts.com The information and opinions expressed on this website, including the bulletin boards and/or chat rooms hosted on this site are the responsibility of the website's owner and/or visitors, and do not represent the opinions of MTD Products Inc.