The Original forum for International Harvester Cub Cadet owners
If you would like to help maintain this site, feel free to donate whatever amount you would like to!
Please check the Frequently Asked Questions (FAQ) before posting your question -
perhaps it has already been answered there.
While you're at it, please also read through the IH Cub Cadet Forum Rules before posting.
Got a suggestion for, question about or problem with the site? E-mail us at firstname.lastname@example.org
OK any other ideas. adjusted carb again and have it set to the best of my ability, I am clueless.
Bill : Black smoke is an indicator of a carb with too rich a mixture. Please recheck your manual and set the main jet adjustment exactly as prescribed....If that doesn't do the trick, post again...By the way, I doubt it's the ignition b-u-t....
OK got it to run desent but now when I kick in the pto it strugles to run and puffs out black smoke, any ideas, I am thinking the solid state ignition, Thanks Bill.
Bill S: you need to work on the needlle valve &/or the float.
Has a Briggs 11hp that I can not get started, It is pumping fuel out the carb something fearce, put a new carb on it and still pumps out fuel, have the needles set one turn out on the idle jet and one and a half out on the main and still pumps out fuel and will not start, any help before I give up and junk it
8315 registered users
Discus 4.10.1 released 03/14/2007
All core web site images and graphics are the property of the IH Cub Cadet forum. Any unauthorized use, reproduction, duplication is prohibited.
DISCLAIMER:This website contains no material provided by MTD Products Inc, is not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc website and MTD Products Inc is not responsible for any of its content. The official MTD Products Inc, website can be found at: www.mtdproducts.com The information and opinions expressed on this website, including the bulletin boards and/or chat rooms hosted on this site are the responsibility of the website's owner and/or visitors, and do not represent the opinions of MTD Products Inc.